Catalogs >
BROAN >
MODELS 2730 & 2736

MODELS 2730 & 2736
1 / 4Pages

Catalog excerpts

SPECIFICATION SHEET BROAN Motor shall be mounted to blower assembly with grease resistant anti-vibration mounts, be removable, and lifetime lubricated. Downdraft system shall operate on 120 VAC and be able to be plugged into a standard grounded outlet. It will have an infinite speed blower control. Air delivery shall be no less than 500 CFM. Air delivery rating shall be certified by HVI. Downdraft blower system to be U.L. listed. MODELS 2730 & 2736 ECLIPSE™ DOWNDRAFT BLOWER SYSTEM • Rugged steel construction • Black paint and/or galvanized finish • Space-saving - can be used with most cooktops on the market • 30" or 36" size - Fits standard-size cabinets • Dynamically-balanced 9-1/8" dia. x 2-1/8" centrifugal blower wheel for quiet, efficient performance • Permanently lubricated, thermally-protected motor • Neoprene, resilient anti-vibration mounts • Unit plugs directly into 120 VAC, 60 HZ, grounded outlet • Uses standard 3-1/4" x 10" duct connector • 3-position discharge - scroll box moveable to adjust to floor joists • Brushed stainless steel cover - just press button to turn unit "ON" • Designer White or Black doors - available separately • Air vent rises to 7" from cooktop for optimum removal of cooking contaminants • Two washable aluminum grease filters • Stainless steel face plate - makes cleanup quick and easy • Flush-mounted, infinite speed blower control • Conveniently located button - press to lower air vent and turn unit "OFF" Downdraft blower system shall be Broan Model 2730 (Broan Model 2736). Unit to have steel housing with electrically coated acrylic paint or galvanized finish. Air vent to rise at least 7" and have a stainless steel face plate for ease of cleaning. Filters to be washable and removable from above. Blower will connect directly to 3-1/4" x 10" rectangular duct (6" round duct using a transition). Blower discharge to be convertible to accommodate ductwork from LEFT, RIGHT, or BELOW and have 7-1/2" side-to-side adjustment. HVI-2100 CERTIFIED RATINGS comply with new testing technologies and procedures prescribed by the Home Ventilating Institute, for off-the-shelf products, as they are available to consumers. Product performance is rated at 0.1 in. static pressure, based on tests conducted in a state-of-the-art test laboratory. Sones are a measure of humanly-perceived loudness, based on laboratory measurements. * Max. blower CFM indicates the performance of the hood blower in open air. Broan-NuTone LLC, 926 West State Street, Hartford, WI 53027 1-800-558-1711 www.Broan-NuTone.com Venmar Ventilation ULC, 550 Lemire Blvd., Drummondville, QC, Canada J2C 7W9 1-877-896-1119 www.broan.ca

Open the catalog to page 1

INSTALLATION PLANNING - MODELS 2730 & 2736 DIMENSIONS NOTE: Dimensions shown (in inches) are for reference only. Before cutting out countertop, refer to instructions packed with downdraft and cooktop. Cooktop Downdraft Front to Back Inside Cabinet Depth Refer to the cooktop installation instructions for dimensions of cooktop, countertop cut-out, and cabinet requirements. The 2730 and 2736 can be installed in most standard 30" and 36" wide cabinets. Cooktop depth can vary greatly from one to another. This may cause the fit of these two appliances to be rather tight. Pay special attention to...

Open the catalog to page 2

SPECIFICATION SHEET BR6AN HOTTE A TIRAGE DESCENDANT MODELES 2730 ET 2736 ECLIPSEMC Couvercle en inox brosse; appuyer sur le bouton pour activer l'appareil Portes decoratives blanche ou noire offertes separement La cheminee s'eleve a 7 po de la surface de cuisson pour une captation optimale des fumees de cuisson Deux filtres a graisses en aluminium Devant en inox se nettoie aisement et rapidement Commande de vitesse affleurante a progression continue Emplacement pratique du bouton; appuyer pour abaisser la Hill Evacuation des odeurs de cuisson sans hotte installee sous armoire. •...

Open the catalog to page 3

PLANIFICATION DE L'INSTALLATION - MODÈLES 2730 ET 2736 DIMENSIONS HOTTE À TIRAGE DESCENDANT NOTE : Les dimensions indiquées (en pouce) le sont à titre de référence seulement.Avant de pratiquer les découpes de comptoir, consulter les instructions incluses avec la hotte à tirage descendant et de la surface de cuisson. 1-3/4 po 2 po Comptoir Surface de cuisson Hotte Avant à arrière profondeur intérieure de l’armoire Consulter le guide d'instalation de la surface de cuisson pour les dimensions de celle-ci, de la découpe du dessus de comptoir et des exigences pour l'armoire. Les modèles 2730 et...

Open the catalog to page 4