Catalogs >
BROAN >
LP80

LP80
2Pages

Catalog excerpts

SPECIFICATION SHEET MODEL LP80 LO PROFILE VENTILATION FAN DESCRIPTION TYPICAL SPECIFICATION BLOWER: • Plug-in, permanently lubricated motor - engineered for continuous operation • Dynamically balanced centrifugal blower wheel for quiet, efficient performance • Low RPM for quiet operation • Fan shall be Broan Model LP80. HOUSING: • Rugged, galvanized steel construction • Metal, 4” oval duct connector with no metallic clatter • Includes 4" oval to 3" round duct reducer • 4” height allows for 2” x 4” wall or ceiling installation • Sturdy, easy, mounting directly to stud or joist • Can be mounted in flat ceilings, sloped ceilings up to 12/12 pitch, and walls GRILLE: • Polymeric construction • Innovative design - the result of extensive research with designers and consumers • Fan shall have corrosion resistant galvanized steel housing. It shall be ducted to a roof or wall cap using 4” or 3" round ductwork. • Blower assembly shall be removable, have a centrifugaltype blower wheel and a permanently lubricated motor designed for continuous operation. • Metal damper/duct connector shall be included. • Air delivery shall be no less than 80 CFM and sound level no greater than 1.0 Sones. All air and sound ratings shall be certified by HVI. • Fan shall be ENERGY STAR® qualified and have an energy efficient permanent split capacitor motor. • Fan shall be U.L. Listed for use over bathtubs and showers when connected to a GFCI protected branch circuit (ceiling mount only). CONTROLS (Purchase separately): • Refer to Broan’s catalog for a complete line of accessories to effectively adapt this fan to your construction requirements. U.L. Listed for use over bathtubs and showers when connected to a GFCI protected branch circuit (ceiling mount only). 1-Year Warranty Model LP80H: Rough-in housings for LP80F finish assemblies (packed 4 per carton). LP80H housings include slide channels and mounting brackets. Model LP80F: Finish assemblies for LP80H rough-in housings (packed 4 per carton). LP80F finish assemblies include blower assembly and grille. Broan-NuTone LLC Hartford, Wisconsin www.broan.com 800-558-1711 Broan-NuTone Canada Mississauga, Ontario www.broan.ca 877-896-1119

Open the catalog to page 1

PERFORMANCE RATINGS MODEL LP80 LO PROFILE VENTILATION FAN HVI PERFORMANCE 4" Duct 0.1 Ps - Static Pressure (inH2O) 0.25 Ps 0.1 Ps - Static Pressure (inH2O) 0.25 Ps Airflow Sound Power Airflow Airflow Sound Power Airflow (CFM) (Sones) (Watts) (CFM) (CFM) (Sones) (Watts) (CFM) 80 HVI-2100 CERTIFIED RATINGS comply with new testing technologies and procedures prescribed by the Home Ventilating Institute, for off-the-shelf products, as they are available to consumers. Product performance is rated at 0.1 in. static pressure, based on tests conducted in a state-of-the-art test laboratory. Sones...

Open the catalog to page 2