Catalogs >
BROAN >
AER110LTK

AER110LTK
2Pages

Catalog excerpts

SPECIFICATION SHEET MODEL AER110LTK ROOMSIDE SERIES DECORATIVE FAN / LIGHT DESCRIPTION • Dimmer model numbers vary slightly depending on color, packaging type, etc. such that variations of Model numbers may be suitable. Consult dimming system manufacturer for additional support in operation * For a list of compatible controls, see NuTone.com. BLOWER: • Plug-in, permanently lubricated motor - engineered for continuous operation • Dynamically balanced centrifugal blower wheel for quiet, efficient performance • Low RPM for quiet operation For installation in flat ceilings only. U.L. Listed for use in insulated ceilings (TYPE I.C.) 3-Year Warranty HOUSING: • Rugged, 26 gauge, galvanized steel construction • Polymeric, 4” duct connector with tapered sleeve and no metallic clatter • 5-3/4” height allows for 2” x 6” ceiling installations • Sturdy, easy, four-point mounting directly to joist TYPICAL SPECIFICATION Fan / Light shall be Broan Model AER110LTK. LIGHT FIXTURE: • Low-profile consumer-validated design • Corrosion-resistant • Adapter bracket for constant air flow, completely covers drywall cuts • Acrylic lens • Light fixture is plug-in and removable • Includes three easy-to-change trim kits - White, Brushed Bronze and Brushed Nickel • Dimmable,16-Watt intergrated LED lighting for energy efficiency • 3500K color temperature provides soft white light - ideal for bathroom illumination • LED lasts up to 15,000 hours for maintenance-free convenience CONTROLS (Purchase separately): • Refer to Broan’s catalog for a complete line of accessories to effectively adapt these fans to your construction requirements. Fan / Light shall have corrosion resistant galvanized steel housing with four-point mounting capability. It shall be ducted to a roof or wall cap using 4” round ductwork. Blower assembly shall be removable, have a centrifugal-type blower wheel and a permanently lubricated motor designed for continuous operation. Non-metallic damper/duct connector shall be included. Light fixture assembly shall be plug-in, removable and include a acrylic lens. It will have a corrosion-resistant base. LED shall be 16-Watt with 3500K color temperature and 1100 lumen output (min.). Air delivery shall be no less than the airflow values and no greater than the sound level values listed in the HVI Performance Specifications provided in this specification (see following chart). All air and sound ratings shall be certified by HVI. Ceiling Ventilator shall be UL Listed for use in insulated ceilings (Type I.C.). DIMMING CONTROLS : • May not be compatible with all dimmer controls • Each application is unique and various factors such as load, common neutrals or other electrical products on the circuit can, in certain instances, cause variance in system performance. Broan Hartford, Wisconsin

Open the catalog to page 1

PERFORMANCE RATINGS MODEL AER110LTK ROOMSIDE SERIES DECORATIVE FAN / LIGHT HVI PERFORMANCE HVI-2100 CERTIFIED RATINGS comply with new testing technologies and procedures prescribed by the Home Ventilating Institute, for off-the-shelf products, as they are available to consumers. Product performance is rated at 0.1 in. static pressure, based on tests conducted in a state-of-the-art test laboratory. Sones are a measure of humanly-perceived loudness, based on laboratory measurements. Static Pressure (in. H 2O - Inches of Water Gauge) Static Pressure Air Flow (CFM - Cubic Feet per Minute)...

Open the catalog to page 2