Catalogs >
BROAN >
AE50110DCL

AE50110DCL
2Pages

Catalog excerpts

SPECIFICATION SHEET MODEL AE50110DCL FLEX DCTM SERIES FAN / LIGHT DESCRIPTION BLOWER: • Plug-in, permanently lubricated, brushless DC motor engineered for continuous operation • Dynamically balanced centrifugal blower wheel for quiet, efficient performance • Low RPM for quiet operation • Selectable settings at 50, 80 or 110 CFM U.L. Listed for use over bathtubs and showers when connected to a GFCI protected branch circuit (ceiling mount only) U.L. Listed for use in insulated ceilings (TYPE I.C.) 3-Year Warranty HOUSING: • Rugged, 26 gauge, galvanized steel construction • Polymeric, 4” damper / duct connector with tapered sleeve and no metallic clatter • 5-3/4” height allows for 2” x 6” ceiling installations • Sturdy, easy, four-point mounting directly to joist • Can be mounted in ceilings up to 7/12 pitch • Optional snap-on flange kit TYPICAL SPECIFICATION GRILLE: • Polymeric construction • Innovative design - the result of extensive research with designers and consumers • 11-Watt integrated LED lighting for energy efficiency • 3500K color temperature provides soft white light - ideal for bathroom illumination • LED lasts up to 25,000 hours for maintenance-free convenience Non-metallic damper/duct connector shall be included. DIMMING CONTROLS: • For a list of compatible dimming controls, see the RESOURCES link for Model AE50-110DCL at www.broan.com • Each application is unique and various factors such as load, common neutrals or other electrical products on the circuit can, in certain instances, cause variance in system performance • Dimmer model numbers vary slightly depending on color, packaging type, etc. such that variations of model numbers may be suitable. Consult dimming system manufacturer for additional support in operation Broan Hartford, Wisconsin Fan / Light shall be Broan Model AE50110DCL. Fan / Light shall have corrosion resistant galvanized steel housing with four-point mounting capability. It shall be ducted to a roof or wall cap using 4” round ductwork. Blower assembly shall be removable, have a centrifugal blower wheel and a permanently lubricated brushless DC motor designed for continuous operation. LED module shall be 11-Watt with 3500K color temperature and 800 lumen output (min.). Air delivery shall be no less than the airflow values and no greater than the sound level values listed in the HVI Performance Ratings provided in this specification (see following chart). All air and sound ratings shall be certified by HVI. Fan / Light shall be U.L. Listed for use in insulated ceilings (Type I.C.) and for use over bathtubs and showers when connected to a GFCI protected branch circuit.

Open the catalog to page 1

PERFORMANCE RATINGS - MODEL AE50110DCL FLEX DCTM SERIES FAN / LIGHT HVI PERFORMANCE Airflow Sound (CFM) (Sones) Power (Watts) Efficacy (CFM/W) HVI-2100 CERTIFIED RATINGS comply with new testing technologies and procedures prescribed by the Home Ventilating Institute, for off-the-shelf products, as they are available to consumers. Product performance is rated at 0.1 in. static pressure, based on tests conducted in a state-of-the-art test laboratory. Sones are a measure of humanly-perceived loudness, based on laboratory measurements. 0.6 Static Pressure (In. H 2O - Inches of Water Gauge)...

Open the catalog to page 2