Catalog excerpts
Britmet Tileform Ltd, Spital Farm Offices, Thorpe Mead Industrial Estate, Banbury, Oxon, 0X16 4RZ
Open the catalog to page 1VENT 3 - BREATHABLE MEMBRANE Vent3 is a triple layer fabric, high performance breather membrane made from high tensile spun bonded polypropylene layers, around a micro-porous polypropylene film. Designed for used in a fully supported or unsupported tiled, slated or metal roof system. Superior moisture vapour permeability is achieved whilst maintaining the highest levels of water resistance. Vent3 has a printed dark blue upper surface and white under-face. The higher vapour permeability and waterproof nature of the membrane, combined with excellent tensile/tear strength, make Vent3 an ideal...
Open the catalog to page 2Vent3 must be installed in accordance with the relevant sections of BS 5534:2003 and Britmet Tileform's fixing instructions Vent3 when installed as a fully supported system, is laid over the support and secured with the counter battens, alternatively the membrane can be installed over counter batens and fixed at 200mm centres using corrosion resistance straps or galvanised clout nails. Tiling battens are fixed to the counter battens leaving a minimum airspace of 25mm between the roof undelay and the tiles for Abutment flashing should be wedged into a mortar joint 25mm deep and at least...
Open the catalog to page 3All BRITMET TILEFORM LTD catalogs and technical brochures
-
SLATE 600
1 Pages
-
ECOPAN PLUS
1 Pages
-
ECOPAN
1 Pages
-
EASY SLATE
1 Pages
-
Pantile 2000
2 Pages
-
Boldroll
2 Pages
-
VILLATILE
2 Pages
-
ULTRATILE
2 Pages
-
PROFILE 49
2 Pages
-
Plaintile
2 Pages
-
Slate 2000
2 Pages
-
Renewable Energy - Solar PV
8 Pages
-
BritLight LED Lights
14 Pages
-
BritPaint
7 Pages
-
Colonade security pipe
13 Pages
-
Rainwater Products
11 Pages
-
Britframe systems
12 Pages
-
Tactray 90
40 Pages
-
Solar Panels
8 Pages
-
Export Catalogue
11 Pages