EMERGENCY LIGHTING

LED emergency module suitable for direct ceiling installation (surface or recessed). Complete set with integrated electronics, LED module, heat sink, optics and battery. Includes multiple lens options for different lighting types: anti-panic, escape route, and spot lighting. Available in the following versions: Emergency lighting for manual testing; Emergency lighting with self-test function; DALI interface and automatic test function. Módulo de emergência LED adequado para instalação direta em tetos (saliente ou encastrado). Conjunto completo com eletrónica, módulo LED, dissipador de calor,...

EMERGENCY LUMINAIRE Luminaria de Emergencia / Luminaire D'urgence GENERAL INFO LED COB Emergency Light CRI>80 GENERAL INFORMATION GENERAL INFORMATION Supply Voltage 220 - 240 V Supply Voltage 220 - 240 V Input Voltage (for safety) 198-264 VAC Input Voltage (for safety) 198-264 VAC Input Voltage (for performance) 198-254 VAC Input Voltage (for performance) 198-254 VAC Starting Time < 0,5s from detection of emergency event Starting Time < 0,5s from detection of emergency event Colour Temperature Colour Temperature EMERGENCY LUMINAIRE PRODUCT TABLE / TABELA DE PRODUTOS / TABLEAU DES PRODUITS TEST...

The Emergency Kit is a safety lighting accessory that can be installed on most Brilumen products, compatible with dimmable or ON / OFF drivers and includes a manual test to check if the system is working properly. This KIT, which operates at constant current, complies the EN 605982-22 “Luminaires - Part 2-22: Particular requirements - Luminaires for emergency lighting” standard, and is protected against short circuits, over-discharge and reverse polarity in the battery. The battery have 3 hours of autonomy and its inverter changes depending on the voltage. O Kit de emergência é um acessório de...

THE EMERGENCY KIT IS MADE UP OF 4 O KIT DE EMERGENCIA E COMPOSTO POR LE KIT D'URGENCE SE COMPOSE DE 4 COMPONENTS: 4 ELEMENTOS: ELEMENTS: Converter 10-52VDC / 50-200VDC Battery 3h LED indicator Test button Conversor 10-52VDC / 50-200VDC Bateria 3h Indicador LED Botao de teste Convertisseur 10-52VDC / 50-200VDC Batterie 3h Indicateur LED Bouton de test EMERGENCY KIT PRODUCT TABLE / TABELA DE PRODUTOS / TABLEAU DES PRODUITS TEST TYPE DURATION 1H DURATION 3H

EMERGENCY LIGHT FOLLOW-ME EVO is an emergency exit luminaire with a double-sided pictogram. Allows installation as SURFACE, RECESSED, SUSPENDED, or WALL MOUNTED. The body is made of aluminum with a white thermo lacquered finish, and the backlit panel is made of clear acrylic, where the exit signaling pictogram is applied. FOLLOW-ME EVO offers the possibility, within the same luminaire, to define a “maintained” or “non-maintained” operating mode at the installation site. By default, it is configured as “non-maintained,” but simply connecting a phase line to “SL” (Switched Line) terminal makes...

GENERAL INFORMATION PICTOGRAMS MATERIALS EMERGENCY LIGHT - FOLLOW - ME EVO

EMERGENCY LIGHT - FOLLOW - ME EVO Input voltage: 220-240 VAC Frequency: 50/60 Hz Output voltage: 5-20 VDC Discharging time: 3h Battery lifetime: 1500 cycles TYPE POWER Permanente ou Nao Permanente | Maintained or Not Maintained APPLICATION ORDER CODE B S Versao basica | Basic Version* 612.XX.PI Parede Bandeirola | Wall Flag 616.XX.PI Colocapao na parede | Wall Mounted 617.XX.PI * Installation kit not supplied | Kit de instalapao nao fornecido | Kit d’installation non fourni ** Include the accessory for ceiling installation: surface-mounted or recessed | Incluir o acessorio para a aplicapao no...

Ligada permanentemente | Allumee en permanence ON only in case of a power failure | Ligada apenas em caso de falha de energia | Ne s’allume qu’en cas de panne de courant Power: 1.5W (in normal or emergency operation | Potencia: 1,5W (no funcionamento normal ou de emergencia) | Puissance : 1,5W (en fonctionnement normal ou en mode de secours) Power: 0.5W in standby and 1.5W in emergency mode | Potencia: 0,5W em standby e 1,5W em modo de emergencia | Puissance : 0,5W en veille et 1,5W en mode de secours —|~SL* SL* DALI OPTION | OPQAO DALI | OPTION DALI REST MODE | MODO DE DESCANSO | MODE REST *Connect...

EMERGENCY LIGHT FOLLOW-ME EVO is an emergency exit luminaire with a double-sided pictogram. Allows installation as SURFACE, RECESSED, SUSPENDED, or WALL MOUNTED. The body is made of aluminum with a white thermo lacquered finish, and the backlit panel is made of clear acrylic, where the exit signaling pictogram is applied. FOLLOW-ME EVO offers the possibility, within the same luminaire, to define a “maintained” or “non-maintained” operating mode at the installation site. By default, it is configured as “non-maintained,” but simply connecting a phase line to “SL” (Switched Line) terminal makes...

FOLLOW-ME EVO emergency track light GENERAL INFO Discharging time: 3h Battery lifetime: 1500 cycles E39 FOLLOW-ME EVO TRACKPRODUCT TABLE / TABELA DE PRODUTOS / TABLEAU DES PRODUITS TYPE POWER ORDER CODE EMERGENCY LIGHT-- — FOLLOW - ME EVO TRACK