Isotec. Under-tile thermal insulation. Composition. Isotec is made up of a rigid central polyurethane foam core with a density of 38 kg/m3 that, with thicknesses of 60-80-100-120 mm, makes it possible to improve the systems thermal resistance, adapting it to the various requirements for living comfort and greater energy saving. The polyurethane panel is coated in a sheet of embossed aluminium, made loadbearing by a reinforced, perforated aluzinc stiffener that works as a support for laying the roof covering, facilitating micro-ventilation of the space under the covering while conveying any accidental infiltration of rainwater from the roof into the gutter. Dovetail (crosswise): Insulation continuity. Rigid, flame-retardant, expanded polyurethane. It is a thermal insulation system for pitched roofs, designed for repairing and refurbishing roofs on old buildings and for creating new roofs. This simple system involves laying modular structural panels that are light-weight and have longitudinal and header edges, shaped to overlap and interlock with one another. Its light-weight, easy manoeuvrability and workability at a height, speeding up correct installation of the panels that, when laid in sequence (from the gutter line to the ridge) quickly form a loadbearing - thermal insulating - micro-ventilated platform that is waterproof in the face of accidental infiltration past the roof covering. This single dry-laid system provides 4 functions: thermal insulation, second-stage waterproofing, under-tile ventilation and, thanks to the stiffener built into the panel, support for attaching the roof covering. Isotec requires compliance with simple installation rules and strict use of the laying completion accessories. When laid correctly, the roof becomes a real living comfort and energy saving resource for the entire building. Loadbearing stiffener in aluzinc steel. Range of thicknesses. ISOTEC Coated on both surfaces by a sheet of embossed aluminium. Battens (longitudinal): Excellent butting of panels, eliminating any risk of thermal bridges. * With variable in relation to the centres for the tiles used (other widths available by request). Via Rivera, 50 - 20048 Carate Brianza (MB), Italy Tel. +39 0362 91601 - Fax +39 0362 990457 E-mail: [email protected] www.brianzaplastica.it Roof structure. The Isotec system is extremely simple to lay, requires normal site tools and does not require specialist labour. It is ideal for both roofs with a discontinuous steel or timber structure or with a continuous structure of any kind.

POSA IN OPERA CON ISOTEC The Isotec system is used for pitched roofs, allowing for the pitch as recommended > 17° > 30% qualsiasi manto di copertura below (in any case follow the technical instructions issued by the manufacturers solo con manto di copertura finale continua (lastre) o sistemi of the various tiles). < 30% < 17° di impermeabilizzazione integrativi α In order to guarantee second-stage waterproofing performance, the Isotec system must preferably be used on roofs with pitches greater than 30%. LAYING WITH ISOTEC Any type of roof covering Only with continuous final roof covering (slabs)...