2014 Elycold Elyplan
16Pages

GELCOAT ROLLS AND SHEETS PRODUCED IN DISCONTINUOUS LAMINATION FIBERGLASS LAMINATES GELCOAT ROLLS AND SHEETS PRODUCED IN CONTINUOUS LAMINATION

Brianza Plastica has for 50 years been the European reference Company in the production of FIBERGLASS LAMINATES IN SHEETS AND ROLLS, used in the most varied fields: ranging from construction to agriculture, from wheel transportation to special applications. Up to 2006 the specialty of this production has been the use of the discontinuous laminating process and hot polymerization plant. Thanks to the important know-how acquired throughout the years and beefed up with requests for material having better features, our laminates are suitable for the production of insulating panels for...

Brianza USA Corporation was established in January 2014 in Elkhart, Indiana (USA). It is equipped with a warehouse and distribution centre to serve manufacturers of recreational vehicles (campers and caravans) and motor vehicles (trucks, buses) throughout the entire US. San Martino di Venezze (Rovigo) - Italy Brianza Plastica supplies fiberglass laminates obtained from cold and hot lamination plants which are able to satisfy all market requirements. Besides, with its three production sites dedicated to fiberglass, it presents itself as a point of reference in the sector for the next few...

Rolls Dimensions Sheets on demand Thicknesses: from 1 to 4 mm Dimensions: max. width 3400 mm Length 60 m Gelcoat rolls and sheets produced in discontinuous lamination Elycold comes from the combination of polyester resin (orthophthalic and isophthalic) and glass fibre; over the years this composite material has replaced aluminium in the production of refrigeration panels for commercial vehicles, campers, caravans and motorhomes, providing manufacturers with excellent long-term technical resistance and UV protection. Fiberglass panels are a great product because, unlike aluminium panels,...

Technical data Glass reinforcement Water Absorption Company Method ELYCOLD Mat + Woven Roving Thickness (h) (1) Glass reinforcement Glass Content Water Absorption Styrene Content (1) Company Method

Outer side Inner side Outer side finishing Inner side finishing -- Gelcoat protected -- Film grooved -- Film protected -- Mechanically grooved -- Open fibers 100% isophthalic resin, anti-UV, available in glossy or satin version. To avoid possible damages during handling. Different colours found in the RAL code or other colours on demand. A particular “sanded” surface avoiding the presence of dust improving the bonding performances. Mechanical sanding to grant a good bonding. The fiber of glass are visible on the surface, this solution is suitable for those who prefer resins for the bonding....

Ultralight laminates with extraordinary features Elycold Xlite / Lite Represents the ideal solution for those who needs laminate with high thicknesses, rigidity and low specific weights keeping unaltered all aesthetic details and values. The type of resins and specific particular components allows to increase the thickness without adding weight, by decreasing the laminate density and also obtaining a greater rigidity contributing to the flatness of the panel and on the covering of the underlying structures. Microspheres Inert gas microspheres in the resin grant a lighter laminate reducing...

Rolls Dimensions Sheets on demand Thicknesses: from 1 to 2,5 mm Dimensions: max. width 3200 mm Length on request Continuous lamination with isophthalic gelcoat Brianza Plastica is the only Company in the sector that can boast both a discontinuous and continuous production line. With the aim of expanding its range of products and of better meeting the growing needs of the Market, the Company has recently invested in an innovative continuous production line, created specifically to meet the various qualitative and quantitative requirements. The main advantage of continuous production is to...

Elycold / Elyplan Elyplan std / High Finishing / Elycold Elycold / Elycold Lite / Elyplan std / High Finishing Elycold / Elycold Lite / Elyplan High Finishing Elycold Anti-Slip Technical data Only Roving Only Roving Company Method Woven Roving Woven Roving Company Method

Outer side Inner side Outer side finishing -- Gelcoat protected Inner side finishing -- Corona treatment 100% isophthalic resin, anti-UV, available in glossy or satin version. -- Film protected To avoid possible damages during handling. This treatment consists in a high voltage, high frequency but low current wave that increase the surface energy and wetting out of the laminate. The result is a smooth surface perfect for the bonding with polyurethane mono/ bi-component glues. -- Mechanically grooved Different colours found in the RAL code or other colours on demand. Mechanical sanding to...

SPECIAL PRODUCTS ELYPLAN EXTRA GLASS Rolls and sheets with and without gelcoat produced in a continuous process This type of laminate has been designed specifically to meet the needs of customers who want more technically efficient materials. Available with or without gelcoat, Elyplan Extra Glass contains a high percentage of glass that offers high rigidity combined with low specific weight. Suitable for special applications such as roofs for buses and the inner and outer walls of temperature-controlled vehicles. ELYPLAN EMBOSSED Rolls and sheets produced in a continuous process with...

ELYPLAN HIGH FINISHING Rolls and sheets with mat produced in a continuous process As part of the Company’s continual improvement process, Brianza Plastica recently expanded its range in order to offer customers a greater selection of products designed for any type of need. Introduced in 2013, the new Elyplan High Finishing laminate uses “chopped strand mat” which gives the laminate a better appearance by reducing the visibility of fibres on the surface. Particularly suitable for large industrial vehicles, it combines the advantages of continuous production in terms of material quality to...