*myarchiexpo

Catalogs
Breeze Controls
Breeze v1 datasheet

Breeze v1 datasheet

Product catalog summary

Description
The V1 series motorized valves are designed for use with thermostats in both domestic and commercial central heating, hot water, and chilled water systems. They control the flow of water and are suitable for heating and cooling applications. The valves feature a forged HPB59-1 brass body, a stainless base with an aluminum case, and nitrile rubber (NBR) sealing material. They are driven by a sealed synchro motor with a stainless steel return spring and are available as normally closed 2-way or 3-way diverting valves. The valves are known for their reliability, with a lifespan of 10,000 working cycles, and are easy to install and wire. Actuators and valve bodies are supplied separately for convenience.

Main Parameters

Power Supply: AC220V/AC24V±10％ 60Hz
Power Consumption: 6.5W
Pressure Rating: 1.6Mpa
Valve Reaction Time: Open Time: ≤12 s, Close Time: ≤8 s
Work Condition: Temperature around: 5~40℃
Working Medium: Cold/Hot water 2~90℃
Motor Torque: >800gf.cm

Specification
The valves are available in various models with different power options (220V or 24V) and sizes (1/2”, 3/4”, 1”). Each model has specific Kv values, closing pressures, and dimensions. For example, the V1-W2D15 model is a 220V, 1/2” valve with a Kv of 2.2 and a closing pressure of 0.2 MPa.

Installation

For high-rise buildings, use a pressure-reducing valve at the bottom of the branch pipe.
The actuator should not be placed under the pipe to prevent water infiltration into the motor cover.
When installed on a vertical pipe, ensure the motor cover avoids water infiltration.
The manual operating lever should be moved slowly along the arrow direction and pressed into the groove for a normally open state. It will return to automatic when powered.
If the actuator is not installed on the valve body, insert the lever into the groove, press the black button on the actuator, place it on the valve, and release to complete installation. Repeat to remove.
For 2-way valves, water flows from B to A, with B as the water supply and A as the by-pass.

Warning

The water quality must meet air conditioning operation system requirements.
Power must be cut off during maintenance to prevent equipment damage and personal injury.
Do not disassemble or touch the circuit when the power is on.

Catalog excerpts

V1 Series Motorized Valve V1 series motorized valves work with thermostats are used in domestic and commercial central heating, hot water and chilled water systems to control the flow of water in the system. • Suitable for heating and cooling applications • Forged HPB59-1 Brass Body, Stainless base with aluminum case • Sealing material: nitrile rubber(NBR) • Driven by sealed synchro motor with stainless steel return spring • Valve Type: Normally Closed 2-way or 3-way diverting valve • Proven reliability: 10K working times, Easy installation and wiring • Actuators and valve bodies supplied separately for convenience 4. Valve Reaction time: Open Time: %M2 s, Close Time: ^8 s 5. Work Condition: Temperature around: 5~40°C 6. Working Medium: Cold/Hot water 2~90C

Open the catalog to page 1

Installation •For high-rise buildings, please use pressure reducing valve on the bottom of branch pipe •The actuator cannot be placed under the pipe when installation since the cover of motor should avoid water infiltration. •The cover of motor must avoid water infiltration when the valve is installed on the vertical pipe. •The manual operating lever: Make the hand lever move slowly along the direction of the arrow, then press it into the groove, the valve will in a normally open state. When current flows through the motorized valve for the first time, the hand lever will be back to automatic...

Open the catalog to page 2

Breeze v1 datasheet

Breeze v1 datasheet

Catalog excerpts

All Breeze Controls catalogs and technical brochures