Technical sheet_CITYDRO Hydraulic retractable bollard
2Pages

HYDRAULIC RETRACTABLE BOLLARDS AUTOMATIC | FREQUENT USE | STANDARD STRENCTH | 2 YEARS WARRANTY ACCESS REGULATION Citydro is an automatic retractable bollard with hydraulic transmission designed by BES. It is available in remote or integrated hydraulic technology depending on the access control requirements. This bollard is perfectly suitable for delimiting a pedestrianised zone, private site or car park, and restricting access to vehicles. The Citydro is ideal for controlling an access point that does not require a very high level of security and does not have very frequent vehicle access. STANDARD STRENGTH IMPACT RESISTANCE 100 kJ with no damage to the bollard's internal components. High bollard steel thickness: 16 mm. Exists in a reinforced version for greater security, with twice the strength. USE Moderate APPLICATIONS Urban access control Reserved access Residential EXISTS IN 2 VERSIONS Remote : hydraulic unit and controller located in a control pillar or control box, and protected from the impact zone. Can easily control 1 to 4 bollards at once. Onboard : the hydraulic unit is integrated into the bollard for easier installation. FREQUENT OPERATION Able to provide an operating frequency approximately 1500 movements per day. MODERATE OUTLAY BOLLARD Steel thickness 16 mm Zinc coated Among the thickest on the market JACK Helps to push up BOLLARD COVER Steel thickness 15 mm With brush seal A dissuasive and automatic access control solution for a moderate investment. * The resistance level specified (kJ) corresponds to the maximum impact energy that the bollard is capable of absorbing without major deformation while ensuring continued operation after an impact. BOLLARD CASING Steel thickness 4 mm Hot-dip galvanisation

HYDRAULIC RETRACTABLE BOLLARDS TECHNICAL CHARACTERISTICS Hydraulic drive Transmission Raising / lowering speed Load capacity Operating temperature Finish Remote unit - IP65 Integrated unit - IP67 Single-acting jack Fail safe : bollard goes down if the power is lost Fail secure (option) : bollard is maintained in the high position if power is lost Raising : 3 to 5 seconds (depending on hydraulic unit) Lowering : < 5 seconds 300 kg -25°C / +70°C Powder coated steel RAL 7016 STANDARD EQUIPMENT Stainless steel cap Crown with LEDs Reflective strip INSTALLATION & MAINTENANCE The Citydro bollard is...