Technical sheet_CITEASY LOW POSITION Mechanical retractable bollard
2Pages

MECHANICAL RETRACTABLE BOLLARDS MANUAL | OCCASIONAL USE | STANDARD STRENGTH | 2 YEARS WARRANTY ACCESS REGULATION Citeasy lowered Position is a “semi-automatic” mechanical retractable bollard. It requires no electrical connection, and is simply lowered manually. This bollard is designed to remain lowered in the ground most of the time. It is used to block and secure an access point for a short period, for example during summer events. This version is ideal for installation on high-traffic roadways. STANDARD STRENGTH IMPACT RESISTANCE 50 kJ with no damage to the bollard's internal components. USE Occasional APPLICATIONS Market place Pedestrian zone Reserved access EASY TO OPERATE The bollard is easily raised and lowered using a specific key. It is easily raised using its pneumatic jack and two-key system. EASY TO INSTALL Designed to be cast into the concrete. It has no electrical requirement for easy installation. MODERATE OUTLAY Dissuasive and secure solution with low investment cost. SECURITY No risk of inadvertent release as it is designed for high-traffic roadways. BOLLARD Steel thickness 8 mm Among the thickest on the market JACK Helps with unlocking BOLLARD COVER Steel thickness 12 mm with brush seal GUIDE PADS Helps with lowering/rasing * The resistance level specified (kJ) corresponds to the maximum impact energy that the bollard is capable of absorbing without major deformation while ensuring continued operation after the impact. BOLLARD CASING Steel thickness 5 mm Hot-dip gal

MECHANICAL RETRACTABLE BOLLARDS MECHANICAL LOW POSITION TECHNICAL CHARACTERISTICS Automatically moves to raised and lowered positions Different types of key Reflective strip Hot-dip galvanised steel Sanding and zinc coating Rust protection Total weight Powder coating : RAL 7016 Options : choice of RAL or Replaceable stainless sleeve or Customised bollard The bollard is lowered using a key and locks automatically in the lowered position. The bollard is raised using a T-handle key and an unlocking key. A mechanical device locks it in the raised position. INSTALLATION & MAINTENANCE TYPES OF LOCK...