MECHANICAL RETRACTABLE BOLLARDS MANUAL | OCCASIONAL USE | STANDARD STRENGTH | 2 YEARS WARRANTY ACCESS REGULATION Citeasy is a “semi-automatic” mechanical retractable bollard. It requires no electrical connection, and is simply lowered manually. This bollard can be used to delimit a regulated access area, reserve a parking space, or secure an area. It is also suitable for supplementing an access control installation fitted with automatic and/or fixed bollards. STANDARD STRENGTH IMPACT RESISTANCE 50 kJ with no damage to the bollard's internal components. USE Occasional APPLICATIONS Market place Emergency access Home / Business EASY TO OPERATE The bollard is easily raised and lowered using a specific key. It automatically and conveniently rises using a pneumatic jack EASY TO INSTALL This bollard is designed as a single unit to be cast into the concrete, which increases its resistance in the event of impact. It has no electrical requirement for easy installation. MODERATE OUTLAY Dissuasive and secure solution with low investment cost. VARIANT : LOW POSITION There is a variant for a bollard normally in lowered position, entirely suitable for roadways. BOLLARD Steel thickness 8 mm Among the tickest on the market JACK Helps with unlocking BOLLARD COVER Steel thickness 12 mm With brush seal GUIDE PADS Helps with lowering/ raising * The resistance level specified (kJ) corresponds to the maximum impact energy that the bollard is capable of absorbing without major deformation while ensuring continued operation after an impact. BOLLARD CASING Steel thickness 5 mm Hot-dip gal

MECHANICAL RETRACTABLE BOLLARDS TECHNICAL CHARACTERISTICS Locking The bollard can be unlocked with different types of key : It has a firefighter key footprint to avoid use of a specific key and facilitate emergency service intervention. "Clavem" key - Single lock : Unlocking is via a single key for all users. INSTALLATION & MAINTENANCE The Citeasy bollard is delivered Full assembled, tested and ready to be installed. • Bollard set into the concrete (without lost formwork) : volume of approximately 0,4 m3. • Maintenance is simplified and minimised. It can be performed by a single technician. Replacement...