1. Catalogs
  2. BORALIT
  3. Rainwater recycling

Rainwater recycling

Rainwater recycling

Rainwater recycling

Product catalog summary
Technical Specifications
  • Tanks: Cylindrical tanks designed for installation in sand, available in volumes of 2,400, 3,300, and 6,000 liters.
  • Pumps: Various pump options including Jet 120, Aspri 15-3, and Pluvia 7-50, each with specific features such as individual suction, corrosion protection, and integrated pressure control.

Rainwater Recycling Systems
  • RME Comfort: Fully automatic pump unit with a water level indicator.
  • RMC Basic: Fully automatic pump unit without a water level indicator.

System Control Options
  • TEA-3: System control with a drinking water tank, featuring automatic control and a motor-controlled tap.
  • TEO-3: Similar to TEA-3 but includes automatic water change and water level indication.

Economic System
  • Features a funnel with a float and electric valve, designed for integration into existing or new systems.

Additional Options
  • Rainwater Filters: Options for floating suction with coarse or fine mesh filters to maintain water cleanliness.
  • Overflow Tubes: Available with or without a one-way valve to prevent odors and vermin entry.

Installation and Maintenance

A rainwater tank collects water from roof gutters, which can overflow into sewers or canals when full. Cleanliness is crucial to prevent odors, and filters can reduce cleaning frequency. Various pump units are available for automatic water management, with options for city-water integration when rainwater is insufficient.

See more

Catalog excerpts

Rainwater recycling-1

Technical options Tanks cylindrical to be installed in sand Volume: 2.400, 3.300, 6.000 litres Rainwater recycling systems RMC Basic JET 120 Aspri 15-3 Pluvia 7-50 nv BORALIT sa - Nijverheidslaan 12 - 9880 AALTER - BELGIUM - Tel+32(0)9 375 11 11 - Fax +32(0)9 375 22 22 [email protected] - http://www.boralit.com - KBC 442-6625251-84 - H.R. Gent 132.714 - B.T.W. BE 422 863 184

 Open the catalog to page 1
Rainwater recycling-2

Economie system Slow flow Floating suction coarse filter / Floating suction fine filter Overflow tube / Overflow tube + one way valve Rainwater recycling systems nv BORALIT sa - Nijverheidslaan 12 - 9880 AALTER - BELGIUM - Tel+32(0)9 375 11 11 - Fax +32(0)9 375 22 22 [email protected] - http://www.boralit.com - KBC 442-6625251-84 - H.R. Gent 132.714 - B.T.W. BE 422 863 184

 Open the catalog to page 2
Rainwater recycling-3

A rainwater tank collects the water coming from the roof gutters. The tank will gradually fill up. As soon as it is full, the surplus water will overflow into the sewer or into a canal. It is important that the collected water is as clean as possible. Any leaves entering the tank will start to rot and cause an unpleasant smell. By installing a rainwater filter, the number of times the tank has to be cleaned, will greatly diminish. There are several possibilities to manage the distribution of the collected rainwater. 1) Fully automatic pump unit with a tank water level indicator: This pump unit...

 Open the catalog to page 3
Rainwater recycling-4

Options To keep the recycled water as clean as possible, following options are possible: Rainwater filter RME Comfort: Full-automatic pump unit with water level indicator. Delivered separately RMC Basic: Full-automatic pump unit wihout water level indicator. Delivered separately JET 120: Low cost centrifugal pump, individual suction, stainless steel, maximum height aspiration: 8 mwk, maximum liquid temperature: 45 °C, maximum pressure of use: PN6, motor: IP 54, connection suction: 1", connection on press: 1", minimum capacity: 0,3 m3/h -> PN 4,2; maximum capacity: 3,0 m3/h -> PN 0,9 Aspri 15-3:...

 Open the catalog to page 4
Rainwater recycling-5

TEA-3: System control with drinking water tank, to be used with a Pluvia or Aspri pump, internai drinking water supply, IRM control, self control system with drinking water floater, automatic control, manually or automatically convertible to drinking water, motor-controlled tap, supply capacity: 3,5 m3/h, connection drinking water: 1/ "M, connection pump: 1" F. TEO-3: Identical system as TEA-3 (see above), but it contains some extras: when low water level occurs, indication of the water level in the tank itself. automatic change of water Economie system: Funnel with float and electric valve....

 Open the catalog to page 5

All BORALIT catalogs and technical brochures

  1. storage tanks

    4  Pages

  2. SEPARATORS

    6  Pages

  3. WATER TREATMENT

    13  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.