Catalogs >
Bongard >
BSP

BSP
4Pages

Catalog excerpts

BSP 46.5 BSP 46.9 BSP 46.15 BSP Reach-in blast freezer The range of reach-in BSP blast freezers from Bongard is designed for the blast chilling and blast freezing of products before conservation. The blast freezing speed guarantees perfect product quality, thus avoiding a dull colour or drying out the dough. Available in various sizes, the BSP blast freezers are completely ready to deal with an increase in production.

Open the catalog to page 1

ZOOming in on… Every blast freezer model is fitted with "super cold" fans, specially designed to cool products to core very quickly - 1 fan on the BSP 46.5 - 2 fans on the BSP 46.9 - 3 fans on the BSP 46.15 On average, it takes only 1 hour to blast freeze 13 kg of Danish pastries (2cm thick) from +22°C down to -18°C at core (BSP 46.9) 3 “super cold” fans with which the BSP 46.15 blast freezer is equipped Ergonomics Hygiene and Safety The entire BSP range is easily adapted to the space available in the laboratory. The door open at 90° when the baking pans are removed, so the blast freezer...

Open the catalog to page 2

BSP 46.15, door opens at 90° to optimize floor space BSP 46.9, open door Economy and efficiency Existing BSP models The ambient air sensor located in the blast freezing enclosure, regulates the blast chilling temperature, down to the pre-set temperature. BSP 46.5 · model designed to receive 5 baking pans 400 x 600 mm at 75 mm intervals · Blast freezing capacity: see table on next page Remark: the ambient air sensors controls the running of the refrigeration unit. The “pin type” sensor allows the reading of the core temperature of the product (in blast freezing or blast chilling mode) and...

Open the catalog to page 3

775 969 420 800 95 340 1010 532 1681 610 Dimensions of the BSP 46.5 770 1677 610 218 958 415 88 530 790 Dimensions of BSP 46.9 and BSP 46.15 Reference Models W9005210 BSP 46.5 electromechanical control panel W9005199 BSP 46.9 electromechanical control panel W9005204 For a good ventilation of the compressor, the BSP must be placed at a minimum distance of 30 mm from the wall. Maximum ambient temperature for compressor: 30°C maxi BSP 46.15 electromechanical control panel General features Energetic features BSP 46.5 BSP 46.9 BSP 46.15 Front (H) 1010 mm 1740 mm 2140 mm Door height (HP) 562 mm...

Open the catalog to page 4