BSCP Conservation unit Gain increase reliability and flexibility with the Bongard blast freezers/ conservation units, thanks to the totally independent conservation and blast freezing compartments.

Two independent dedicated refrigerating units, one for blast freezing and the other for conservation. A revolutionary operating principle The conservation and blast freezing compartments each have a dedicated refrigeration unit, which makes them totally independent. This provides greater reliability, greater flexibility and more available power! A manual hatch, with thermal bridge rupture, separates the blast freezing section from the conservation section. This hatch can be opened when required, to use the blast freezing power in the conservation compartment. The blast freezing cell can freeze...

A door closing return system with spring pivot, installed to prevent hot air being drawn into the chamber. The interior is in stainless steel, a guarantee of quality and food safety. Opticom, for simple management The standard Opticom electronic control (electro-mechanical version optional) is used to operate in “timer” mode or in “pin sensor” mode for blast chilling as well as blast freezing cycles. The various parameter selections (temperature, duration, etc.) can be re-adjusted manually during an automatic mode cycle. It is also possible to program the maximum and minimum temperature limit,...

1700 2500 3300 1715 opened door 1130 202 S C C C C BSCP 31 Cr C S C C C Cr C C BSCP 51 187 S C 150/200 Adjustable side Cr C 2237 960 BSCP 71 1030 S Blast freezer compartment (9 trays 400 x 600 mm, step of 74 mm) C Conservation compartment (20 trays 400 x 600 mm ou 10 trays 600 x 800 mm, step of 74 mm) Cr Reduced conservation compartment (10 trays 400 x 600 mm ou 5 trays 600 x 800 mm, step of 74 mm) Energy properties General features Model BSCP 31 BSCP 51 Blast freezer BSCP 71 Height Model Front (without compressor) 2237 mm 2237 mm 2237 mm Conservation unit 31-51-71 31 51 71 3 CV Electric power...