Catalogs >
Bongard >
Bongard - freezing line

Bongard - freezing line
40Pages

Catalog excerpts

BFA-BFC The advantages BFA Retarder-proofer BFP Retarder-proofer with tilting doors BFC Retarder-proofer BFE Final proofer Galea Drying cabinet for linen canvas Retarding Accessories Racks, grids and linen canvas > EVS-BSC-EVN The advantages EVS 9 Blast FreezerCombined blast freezer & conservation unit BSCPEVS 46 Blast Freezer/Conservation unit EVS 68 Blast Freezer/Conservation unit BSC Roll in blast Freezer EVN 68 Conservation unit > Electronic control Opticom for BFA-BFC Electronic control Opticom for EVS-BSC-EVN >

Open the catalog to page 1

notes Attention : please read the "general features" of each article. > Important After receipt of the order and the completed "technical order addendum", an average delivery time of 4 weeks is to be considered. Drawings are not binding. The technical "order addendum" is to be completed for each order. > Our compressors are intended for a room temperature of 30C maximum. For higher temperature, please consult us. For a room temperature up to 40аC, please use the option tropicalized compressor. > The equipment must be installed in an area with normal ventilation (< 70% relative density)....

Open the catalog to page 2

Proofing by 3 adjustable steps or constant temperature raising degree by degree (Bongard patent) with stabili-sation time at each degree (slow proofing process). This assures an homogeneous warming up, even at the core of the bread thus no thermal shock and limited condensation. A same chamber allows an overall cycle retarding and proofing. In manual mode chamber can be temporarely used as a chiller. > A powerful cooling unit fits each chamber, this pre-vents shrinning formation on the dough. The upright position of the evaporator is a real vertical space-saver, particularly in small...

Open the catalog to page 3

Cooling unit ready for use with refrigerating fluid R 404 A preserving the ozone layer Enclosures: 60 mm isothermal hot electro-plated zinc panels, pre-lacquered, painted and coated with a protective polyethyl-ene covering Control panel with electronic controls (BFA and BFC alike) with reheating by levels and/or constant increase of the temperature (degree per degree) with stabilisation of the temperature in hot cycle, and possibility of dormillonӔ (if after a period of 45 min following programmed fermenta-tion cycle, nobody has withdrawn the product, the cabinet goes back to a temperature...

Open the catalog to page 4

BFP with tilting doors Cooling unit ready for use with refrigerating fluid R 404 A preserving the ozone layer Enclosures: 60 mm isothermal hot electro-plated zinc panels, pre-lacquered, painted and coated with a protective polyethyl-ene covering Control panel with electronic controls (BFA and BFC alike) with reheating by levels and/or constant increase of the temperature (degree per degree), with stabilisation of the temperature in hot cycle, and possibility of dormillonӔ (if after a period of 45 min following programmed fermenta-tion cycle, nobody has withdrawn the product, the cabinet...

Open the catalog to page 5

Fermentation chamber for racks 400/460 x 800 ,800 x 600, 700 x 900 , 750 x 900 depending on model, to 1215 x 800 mm 60 mm thick isothermal Panels. Constituted by modular panels assembled by eccentric hooks The panels are realized in polyurethane foam, of density 40 kg / m3 Electronic Regulation Electromechanical hygrostat Sheet metal coating, inside aluminium of 8/10 thickness pre-lacquered, painted and coated with a protective polyethylene covering Humidity setting from 30 to 99 % Management of the forgotten dough (dormillon : if after a period of 45 min following programmed fermentation...

Open the catalog to page 6

Fermentation chamber for racks 400/460 x 800 ,600 x 800, 700 x 900 , 800 x 1000 mm 60 mm thick isothermal Panels. Constituted by modular panels assembled by eccentric hooks Electromechanical Regulation The panels are realized in polyurethane foam, of density 40 kg / m3 Electromechanical hygrostat Humidity setting from 30 to 99 % Sheet metal coating, inside aluminium of 8/10 thickness pre-lacquered, painted and coated with a protective polyethylene covering > Handle on the left unless otherwise specified Electronic hygrostat with electronic regulation Full Doors (same constitution as panels...

Open the catalog to page 7

Galea Assembledinfactory Cabinet designed to dry linen canvas or mini setters. The cabinet is equipped with an electronic thermostat & an automatic timer allowing the automatic switch-off of unit at end of drying time. An electro-mechanical hygrostat drives the automatic extrac-tion of excess humidity. The drying cabinet displays the temperature & remaining drying time, from 30 to 120 minutes depending on humidity level. Isothermal panel made of injected polyurethane foam (60 mm) 40 kg/m3, without CFC Stainless steel (5/10) interior and exterior panels, pre-lacquered, painted and coated...

Open the catalog to page 8

(1) (2) Rack for deck oven Rack for deck oven Pointed ends loaves model 600 x 800 Example of grids (1) useful (2) overall > Racks, Grids & canvas W0001720 Linen canvas 1700 x 800 mm, for grid ref. W0000964, W0000086 W0001721 Linen canvas 2300 x 800 mm, for grid ref. W0000087, W0000088, W0000089, W0000090 W0002415 Linen canvas 1600 x 600 mm, for grid ref. W0000275 07055036 Linen canvas 600 mm wide, per roll of 50 m 32, route de Wolfisheim - F-67810 Holtzheim Tl : 33 (0)3.88.78.00.23 - Fax : 33 (0)3.88.76.19.18 www.bongard.fr - bongard@bongard.fr >

Open the catalog to page 9

BSC are supplied fully mounted on an insulating base (on standard). Easy access to technical parts The EVS are equipped with very easily removable hook racks for an easy cleaning. On standard, electronic regu-lation with a pin type sensor (except EVN). > Lithium cell for guaranteed longevity (10 years) No change in the program during use Permanent control by digital display of programmed baking time, actual day and actual local time Control of settings possible after cycle is started Memory of program in the case of power failure (brown out) (as soon as power is back program continues like...

Open the catalog to page 10

Blast freezer for 9 trays 400 x 600 > Electronic regulation Blast freezing at - 18 at core of 21,6 Kg per cycle of 4h15 Isothermal panels (70 mm thick) inside and outside, internal and external of stainless steel Refrigerating fluid R 404 A which preserves the ozone layer Polyurethane foam 40 kg/m3 Integrated compressor Smooth interior finish with rounded corners Reversible door handle pls specify on order (standard : door handle on the left) Electronical pin type sensor for control of blast freezing temperature Easily adjustable and removable slides Stainless steel hook racks with spacing...

Open the catalog to page 11