video corpo

TOPLIFT Construction Winches
8Pages

{{requestButtons}}

Catalog excerpts

TOPLIFT Construction Winches - 1

Toplift and construction winches www.boecker-group.com

Open the catalog to page 1
TOPLIFT Construction Winches - 2

1 Knee joint Adjustable from 20°- 45°. Heavy duty hardened steel pulleys for long life of rope. 2 Drive unit Toplift Basic Hoisting speed 25 m/min., suitable for standard and tilting carriage, maximum payload 150 kg. 3 Standard carriage For use when there is no need to tilt for unloading. A safety break device prevents the carriage from falling in the event of a rope failure. 4 Universal platform Used for the transport of shingles, roof tiles and slate. 5 Articulated base plates Perfect positioning due to articulated base. Also available as height adjustable base plates (optional). 1...

Open the catalog to page 2
TOPLIFT Construction Winches - 3

1 Sheet platform for plasterboards etc. up to 1.50 m width. 2 Drive unit Toplift HighSpeed Hoisting speeds 20 and 40 m/min., suitable for standard and tilting carriage, maximum payload 230 kg. 3 Tilting carriage Tips the load at the head section or pivots to a comfortable unloading position (with broken rope device). 1 Toplift drive Can also be used as a construction winch. 2 Swing arm The lightweight swing arm with a dead weight of only 15 kg is quickly mounted at the desired scaffold level. 3 Overload safety device Serves as attachment device and overload protection device. 4 Hook Can be...

Open the catalog to page 3
TOPLIFT Construction Winches - 4

Technical Data & Accessories 1 head section 2 head support for supporting the hoist on flat roofs, floors and window openings 3 rail 2 m 4 standard carriage 5 foot section 2 m with large foot plates to spread the load 4 adjustable tube support 2 5 drive unit with slack rope device (latch for easy assembly) 6 undercarriage for easy positioning of the hoist along the building

Open the catalog to page 4
TOPLIFT Construction Winches - 5

solar-platform standard tilting bucket 80 litre (for tilting carriage only) sheet-platform 90 x 15 x 220 cm Technical Data Type Subject to change of dimensions and design.

Open the catalog to page 5
TOPLIFT Construction Winches - 6

Winch Baby The multi purpose winch. A must for any tool box. To lift all kinds of loads. The BABY is small, lightweight and versatile. Control by push button on a 1.5 m long cable. ■ Capacity 100 kg ■ Lifting speed 15 m/min ■ Dead weight 18 kg ■ Wire rope 20 m Winch Boy To lift all kinds of load, i.e. blocks, concrete, screed, mortar, tiles, radiators etc. The BOY can be controlled by push button either at the winch or on ground. ■ Capacity 200 kg ■ Lifting speed 19 m/min ■ Dead weight 45 kg ■ Wire rope 31 m Winch Minilift The Minilift is particularly suitable for scaffolding. It is simply...

Open the catalog to page 6
TOPLIFT Construction Winches - 7

Scaffold swing arm Minilift Hoisting ring for four buckets Hoisting chain for scaffold elements Bucket carrier Hoisting chain for wheelbarrows Technical Data Baby Minilift Standard Minilift HighSpeed Scaffold floor Scaffold floor Scaffold foot below Scaffold foot below Lifting speed [m/min] Rope length, lifting height [m] Typ Erection site drive Voltage [V / Hz] Motor capacity [kW] Dead weight Subject to technical changes excepted.

Open the catalog to page 7

All Böcker catalogs and technical brochures

  1. Agilo

    6 Pages

  2. Trailer Cranes

    12 Pages

  3. Truck Cranes

    12 Pages