Catalogs >
BOCCI >
38.3m

38.3m
1 / 2Pages

Catalog excerpts

LIGHT SOURCES: CANOPY: LAMPING: LENGTH OF COPPER: MATERIALS: WEIGHT: Three 3 x Copper 62mm (2.5”) diameter 10w xenon 6000mm (20’) maximum Blown glass, copper and steel canopy, flexible copper tubing and copper hardware Approximately 8kg (17.6lb) Remote mounted Preset lengths, composed during installation The 38.3m is a 38 series chandelier with 3 light sources, 2 moons and three independant canopies. The 38 series is an extension of the blown glass technique introduced in the 28 series. In this case, there are 4-6 cavities blown within each pendant, 3 of which house light sources, while the remainder are deep enough to house plants. Electricity and suspension are achieved using stiff copper tubing, which is allowed to tangle and crinkle, seemingly without regard for gravity. Once in a while these copper tubes loop around moon white planters, which appear to have escaped from the confines of the lit clear glass spheres. APPLICATIONS The 38.3m can be used on its own, or like other 38 series chandeliers works well in applications where the intent is to create a horizontal spread of pendants and foliage. This chandelier works best in groupings where the copper can be manipulated between multiple canopies to allow for limitless composition. Additionally, this chandelier can have canopies that mount onto a wall, as long as one supporting canopy is suspended from the ceiling. Popular residential and commercial applications include clusters over tables in dining rooms and restaurants, accessory lighting in living rooms and baths, linear configurations over bars and kitchen islands, large clusters in foyers and lobbies in both private and public spaces, as well as single chandeliers as points of interest such as an herb garden. NOTES + The installation of the 38 is more involved than other chandeliers due to the manipulation and composition of the copper tubing. + These standard chandeliers can be used in an infinite variety of groupings to create cohesive installations, with single pendants bridging from canopy to canopy. + Air plants and/or succulents recommended (not included). + Prior to watering the plants, please wait for the glass to cool down. Worldwide patents pending Made in Vancouver, Canada info@bocci.ca www.bocci.ca Design by Omer Arbel PRODUCT SPECIFICATION europe@bocci.ca www.bocci.ca © 2013, Bocci Design and Manufacturing Inc. All rights reserved.

Open the catalog to page 1

diameter approx. 5” (130mm) 10W Bocci 24.1.1 long life xenon bipin. 1 Separate the copper tubes according to length. Very carefully uncoil the copper tube with both hands to avoid kinking. Note: be very careful not to overbend the copper tubes as it will leave a permanent kink that can not be removed. Mount transformer remotely. Route output wiring from transformer to fixture location. Join transformer wiring to mini canopy wiring using the wagos provided. Connect the transformer leads to line voltage. Xenon/Halogen/LED: Connect the coaxial cable to the open slots in the terminal block on...

Open the catalog to page 2