black powder coated stainless steel canopy 160mm (6.3”) in diameter x 40mm (1.6”) deep blown glass, matte black powder coated stainless steel armature, electrical components, black powder coated canopy WEIGHT: POWER SUPPLIES: DESCRIPTION A steel armature system in a black powder coated finish allows pre-composed branches to be easily connected to a series of hubs during installation. Individual 28 pendants result from a complex glass blowing technique whereby air pressure is intermittently introduced into and then removed from a glass matrix which is intermittently heated and then rapidly cooled. The result is a distorted spherical shape with a composed collection of imploded inner shapes, one of which acts as a shade for the light source. 160 (6.3”) 40 (1.6”) Standard 28s are made with clear glass exterior spheres and milk white interior lamp holder cavities. 28s are possible with infinite versatility in colour compositions, sizes and shapes. + Purchase replacement lamps online at www.bocci.com/shop/bulbs + Power supplies can be mounted remotely in an easily accessible and hidden location for ease of long-term maintenance. + The fixture can be leveled with aircraft cable and swag hooks (provided). + The fixture is not designed for standard ceiling octagonal junction box. DO NOT install fixture directly to the junction box. + To maintain your fixture, please regularly dust with a lint-free cloth. If further cleaning is required, dampen a lint-free cloth with water only and wipe gently to remove dust or debris. CAD Patent # 134238 US Patent # D687,740 EU Patent # 001695834-001 to 004 1420 (56”) Made in Vancouver, Canada PRODUCT SPECIFICATION [email protected] www.bocci.com [email protected] www.bocci.com © 2021, Bocci Design and Manufacturing Inc. All rights reserved. An

structural substrate wood backing drywall Live (black) canopy bracket Neutral (white) canopy cover canopy cover canopy connector wire canopy connector secondary dimming module canopy connector Feed the canopy connector wires through the slots on the canopy bracket. Attach canopy connector to the canopy bracket with a single screw, just to hold it in place. Measure and mark fixture location on the ceiling. Ensure the ceiling in this location has adequate structural support for the canopy bracket. Wood backing at least 3/4” (19mm) thick is recommended. Thread the hub to the extender and secure with...

tie a knot in the aircraft cable to ensure it does not slip through branch metal tube Neutral (white) secondary 12V primary input Live (black) i. Attach the driver to the canopy bracket. Begin assembling the branches. Remove the metal tubes at the end of each branch by unscrewing the set screw. Insert provided LED into socket. Check that each lamp is working properly as you go along by keeping the power on. Thread the pendant onto the pendant holder and secure with set screw. Thread the ball end of the aircraft through the set screw. The ball end of the aircraft should sit nicely inside the set...