The 14 is an articulated, seamed cast glass sphere with a frosted cylindnca void that houses either a low voltage (12V, 10W halogen/xenon) or LED(12V, 15W) lamp Individual pendants are visually quite subtle, but gain tremendous strength when multiplied and clustered in large groups Light interacts with the bubbles and imperfections of the cast glass to produce a glow reminiscent of small candles floating within spheres of water Cast glass is an organic process, imperfect by nature and each 14 is hand made, thus, every piece produced is unique Suitable for residential and commercial use CSA, CE approved, approved to UL standards by CSA Popular applications to date include clusters over tables in residential dining rooms and restaurants, accessory lighting in living rooms, decorative lighting, linear configurations or clusters over bars and kitchen islands, and large chandeliers in building lobbies and other public spaces Cast glass, blown borosilicate glass, braided metal coaxial cable, eléctrica components and a matte white powder coated canopy Note Longest and shortest lengths may have a variance of ±50mm (2") Note As an alternative to a built-in transformer. Bocci recommends mounting transformers remotely in an easily accessible and hidden location for ease of long-term maintenance Purchase replacement lamps online at wwwbocci ca/lamps Unless otherwise noted when ordering, all chandeliers will be outfitted to Worldwide patents issued and pending US patent # D556, 361 Made in Vancouver, Canada For additional information, please contact BOCCI Vancouver BOCCI Berlin Design by Omer Arbel PRODUCT SPECIFICATION © 2010, Bocci Design and Manufacturing Inc. All rights reserved. These drawings and the information contained herein may not be reproduced, communicated to the public, or made available in whole or in part without prior permission. Any inquiries should be directed to the following email address: [email protected].

chandelier canopy position on plywood backing or wood blocking to securely anchor responsibility Measure the plywood so that it fits within the canopy side walls (refer to detail above). ceiling substrate Connect transformers inside the canopy to line voltage wire to the black wire and white wire to the white wire wire to the brown wire and white wire to the blue wire connect the green wire with yellow stripe to the bare copper wire or green wire in Note: As an option, Bocc recommends mounting hidden location for ease certified personnel to insure compliance with the code Anchor canopy into the...