Catalogs >
BOCCI >
100.1mo_SpecInstructions

100.1mo_SpecInstructions
3Pages

Catalog excerpts

mini outie canopy 38mm (1.5”) in diameter x 16mm (0.6”) deep LAMPING: COAX: MATERIALS: WEIGHT: POWER SUPPLIES: 1.5w LED (2000K, 2500K, 3500K) adjustable 3000mm (10’) standard / up to 30500mm (100’) maximum blown glass, braided metal coaxial cable, electrical components, white polyurethane canopy approximately 2.75kg (6.1lb) remote mounted (ﬁxture does not hook directly to a junction box). Power supplies included adjustable up to 3000 (10’) standard adjustable up to 30500 (100’) custom The 100.1mo is a single 100 pendant ﬁxture with a mini outie canopy size. The mini outie canopy is 38mm (1.5”) in diameter and 16mm (0.6”) deep, which creates a subtle proﬁle that will essentially disappear into the application surface. The pendant drop lengths on this light ﬁxture are adjustable up to the speciﬁed maximum. 100 brings multiple glass artists together in a performative act. Molten glass bubbles are prepared and then smashed together to produce unpredictable interlocking glass forms. NOTES + Purchase replacement lamps online at www.bocci.com/shop/bulbs + All chandeliers will be outﬁtted with 2500K lamps if not speciﬁed. + Requires power supplies to be remote mounted. US Patent Pending EU Patent # 008526131-0001 LOW VOLTAGE LUMINAIRE E476186 Made in Vancouver, Canada MINI OUTIE CANOPY PRODUCT SPECIFICATION sales@bocci.com www.bocci.com europe@bocci.com www.bocci.com © 2021, Bocci Design and Manufacturing Inc. All rights reserved. Any inquiries s

Open the catalog to page 1

screws ~VAC Neutral Live lamp holder setscrews strain relief lamp 12V butt splice Very carefully uncoil the braided coaxial cable in a spool like manner. Insert your index ﬁngers into opposite sides of the roll then rotate your ﬁngers around each other to unroll the coaxial cable. Drill a 9mm (0.35”) diameter hole in ceiling material. Pull low voltage house wire through the hole. Determine the overall drop for the pendant ﬁxture. Use the 2mm Allen key to loosen the setscrew in the canopy and gently feed the cable through the canopy until you have reached your desired drop length. Use Allen...

Open the catalog to page 2

Step 2: Insert the pendant hardware assembly into the pendant. Give the pendant a gentle pull to ensure the screws are locked onto the pendant. The cap should sit ﬂat on the pendant hardware. Clean ﬁngerprints from surfaces. Step 3: Tighten the 3 screws until they are fully engaged (refer to illustration above). Slide cover cap onto the coaxial cable and place into the inset portion of the pendant hardware. If the screws are sticking out and the cap isn’t sitting ﬂat on the pendant hardware, please check to ensure the screws are fully engaged. Refer to step 8 & 9 for more details. For...

Open the catalog to page 3