SPANDEK®
6Pages

SPANDEK® DESIGN AND INSTALLATION GUIDE

LYSAGHT SPANDEK® SPANDEK® is a contemporary-looking, trapezoidal profile which is ideal where a stronger, bolder, contemporary corrugated appearance is required. SPANDEK® was originally designed as a strong attractive roofing material for industrial and commercial construction - however SPANDEK® has proved equally popular for homes and public buildings, underlining its versatility and pleasing appearance. SPANDEK® combines strength with lightness, rigidity and economy. 24mm LENGTHS Sheets are supplied custom cut. MASSES ZINCALUME steel COLORBOND® steel MATERIAL SPECIFICATIONS Next...

SPANDEK® LIMIT STATE WIND PRESSURE CAPACITIES (KPA) 0.42 BMT Span Type Fasteners per sheet per support Limit State SPANDEK® LIMIT STATE WIND PRESSURE CAPACITIES (KPA) 0.48 BMT Span Type Fasteners per Limit State sheet per support Roong & Serviceability Walling Proles 6.50 or if end lap End spans t in sheeting join expansion Support must not be less than 1mm BMT. Spacing denitions ES = End Span IS = Internal Span O = Overhang SS = Single Span MAXIMUM ROOF LENGTHS FOR DRAINAGE MEASURED FROM RIDGE TO GUTTER (M) Roong & Walling Proles or if end lap End spans t in sheeting join expansion SPAN...

INSTALLATION Below are typical guidance on installation. For more detailed installation guidance refer to the LYSAGHT® Roofing & Walling Installation Manual. FASTENING SHEETS TO SUPPORTS SPANDEK® is pierce-fixed to timber or steel supports. This means that fastener screws pass through the sheeting. You can place screws for SPANDEK® through the crests or in the valleys. To maximise roof watertightness, always place screws through the crests. For walling, you may use either crest or valley-fixing. Side-lap fastener Always drive the screws perpendicular to the sheeting, and in the centre of...

FASTENERS WITHOUT INSULATION Fix to Steel Single & lapped steel thickness ≥0.55 up to 1.0mm BMT Fix to Steel Single steel thickness ≥1.0mm BMT up to 3.0mm BMT Fix to Steel Total lapped thickness ≥1.00 BMT up to 3.8mm BMT Fix to Timber Hardwood Fix to Timber Softwood J1-J3 J4 Crest Fixed 12-14x45, Metal Teks HG, HH or AutoTeks 12-14x50 12-14x45, Metal Teks HG, HH or AutoTeks 12-14x50 12-11x65, Type 17 HG, HH or Roof Zips M6-11x65 10-16x16, Metal Teks, HH or 10-16x25 Designer Head or Roof Zips M6-11x25 10-16x16, Metal Teks, HH or 10-16x25 Designer Head 10-12x25, Type 17, HH 10-16x25 Designer...

PRODUCT DESCRIPTIONS • All descriptions, specifications, illustrations, drawings, data, dimensions and weights contained in this catalogue, all technical literature and websites containing information from Lysaght are approximations only. They are intended by Lysaght to be a general description for information and identification purposes and do not create a sale by description. Lysaght reserves the right at any time to: (a) supply Goods with such minor modifications from its drawings and specifications as it sees fit; and (b) alter specifications shown in its promotional literature to...