LysaghtCustomOrbAccent35-DesignInstallGuideFeb2013
6Pages

{{requestButtons}}

Catalog excerpts

LysaghtCustomOrbAccent35-DesignInstallGuideFeb2013 - 1

Corrugated steel cladding optimised for commercial applications • USTOM ORB ACCENT™ 35 is ideal for C traditional or contemporary design and is optimised for commercial and industrial applications • Can be fixed quickly and easily • 21mm x 35mm corrugations provide higher 1 water carrying capacity & 2° minimum roof pitch • .48mm BMT superior strength, higher/better 0 spanning capability than standard 0.48mm CUSTOM ORB® roofing

Open the catalog to page 1
LysaghtCustomOrbAccent35-DesignInstallGuideFeb2013 - 2

LYSAGHT CUSTOM ORB ACCENT™ 35 Commercial corrugated steel cladding With corrugations 60% deeper and 50% wider than traditional corrugated profiles LYSAGHT CUSTOM ORB ACCENT™ 35 is ideally suited to the large cladding areas in modern industrial, commercial, residential and recreational buildings. Masses CUSTOM ORB ACCENT™ 35 The combination of deeper, wider ribs also deliver real performance benefits over the life of a building. Stronger than traditional corrugated not only means it’s tougher, thereby reducing the potential for damage during installation and maintenance, but also means it...

Open the catalog to page 2
LysaghtCustomOrbAccent35-DesignInstallGuideFeb2013 - 3

CUSATOM ORB ACCENT 35 LYSAGHT CUSTOM ORB ACCENT™ 35: Limit State wind pressure capacities Limit State wind pressure capacities (kPa) 0.48BMT (kPa) 0.48mm BMT Span Serviceability Strength • Table data are based on supports of minimum 1mm BMT. Roofing & Walling profiles Limit states wind pressures CUSTOM ORB ACCENT™ 35 offers the full benefits of the latest methods for modelling wind pressures. The Wind Pressure capacity table is determined by full scale tests conducted at BlueScope Lysaght’s NATA-registered testing laboratory, using the direct pressure-testing rig. Testing was conducted in...

Open the catalog to page 3
LysaghtCustomOrbAccent35-DesignInstallGuideFeb2013 - 4

Installation Fasteners without Insulation Fix to Steel Single & lapped steel thickness ≥0.55 up to 1.0mm BMT Fix to Steel Single thickness steel ≥1.0mm BMT up to 3.0mm BMT Fix to Steel Total lapped thickness of ≥1.0mm BMT up to 3.8mm BMT 10-16x16, Metal Teks, HH or M5-16x25 Designer Head or RoofZips M6-11x25 10-16x16, Metal Teks, HH or M5-16x25 Designer Head 10-12x25, Type 17, HH M5-16x25 Designer Head or 12-11x25, Type 17, HH 10-12x30, Type 17, HH 12-11x25, Type 17, HH M5-16x25 Designer Head or RoofZips M6-11x25 Crest Fixed Side laps (If required)10-16x16, Metal Teks, HH or Roof Zips...

Open the catalog to page 4
LysaghtCustomOrbAccent35-DesignInstallGuideFeb2013 - 5

Turning-up CUSTOM ORB ACCENT™ 35 Accent 21 how you can treat the ends of sheets to This section describes CUSTOM ORB ACCENT™ 35 Flashings and Cappings Standard flashings and cappings are available. (See below.) maximise waterproofing, or to stop vermin entering. At the high end of roofing, wind can drive water uphill, under the flashing or capping, into a building. Description Standard Flashings To minimise this problem, you turn up the valleys (or pans) at the high end of roofing. (The process is called turning-up (or stop-ending). Standard Flashings All roofing on low slopes (≤25º) should...

Open the catalog to page 5
LysaghtCustomOrbAccent35-DesignInstallGuideFeb2013 - 6

Product Descriptions Disclaimer, warranties and limitation of liability All descriptions, specifications, illustrations, drawings, data, dimensions and weights contained this catalogue, all technical literature and websites containing information from BlueScope Lysaght are approximations only. They are intended by BlueScope Lysaght to be a general description for information and identification purposes and do not create a sale by description. BlueScope Lysaght reserves the right at any time to: This publication is intended to be an aid for all trades and professionals involved with...

Open the catalog to page 6

All BlueScope Steel catalogs and technical brochures

  1. Flatdek

    6 Pages

  2. SPANDEK®

    6 Pages

  3. Spanrib

    6 Pages

  4. BONDEK®

    12 Pages

Archived catalogs

  1. Zincalume

    5 Pages

  2. Fencing

    6 Pages

  3. Colorbond®

    2 Pages