Deeper, stronger corrugated steel cladding • CUSTOM ORB ACCENT™ 21 is ideal for traditional or contemporary design • Suitable for industrial/commercial roofing and walling applications • 6mm x 21mm corrugations provide 7 higher water carrying capacity and 3° minimum roof pitch • an be fixed quickly and easily C

LYSAGHT CUSTOM ORB ACCENT™ 21 Corrugated steel cladding Equally at home on a traditional or contemporary design building LYSAGHT Custom Orb Accent™ 21 is the perfect alternative to traditional corrugated steel roofing. The deeper profile of Custom Orb Accent™ 21 steel roofing not only gives a striking visual effect but also delivers real benefits to the architect, builder and owner alike. With the same 762mm cover width as traditional corrugated steel roofing LYSAGHT Custom Orb Accent™ 21 can be easily utilised on existing and new roofs without the need for changes to supporting structures. The...

CUSTOM ORB ACCENT™ 21 Limit State wind pressure capacities (kPa) 0.40 BMT Span Type Limit State Serviceability Strength CUSTOM ORB ACCENT™ 21 Limit State wind pressure capacities (kPa) 0.48 BMT Span Type Limit State Serviceability Strength Serviceability Strength Serviceability Strength • Table data are based on supports of minimum 1mm BMT. Roofing & Walling profiles Limit states wind pressures Step CUSTOM ORB ACCENT™ 21 offers the full benefits of the latest methods for modelling wind pressures. The Wind Pressure capacity table is determined by full scale tests conducted at BlueScope Lysaght’s...

Fasteners without Insulation Single & lapped steel thickness Single thickness steel Total lapped thickness of Hardwood Crest Fixed RoofZips M6-11x50 12-14x35, Metal Teks HG, HH 12-11x50, Type 17 HG, HH 12-11x50, Type 17 HG, HH Fixed M5-16x25 Designer Head Side laps (If required)10-16x16, Metal Teks, HH or RoofZips M6-11x25 or M5-16x25 Designer Head or Sealed blind rivet 04.8mm aluminium Notes: 1] For other steel thicknesses not specified please seek advice from screw manufacturer. 2] Values given are: gauge/threads per inch/ lengths (mm). HH = Hex. Head, WH = Wafer Head, HG = 3] Care is required...

Turning-up CUSTOM ORB ACCENT 21 CUSTOM ORB ACCENT 21 Flashings and Cappings This section describes how you can treat the ends of sheets to maximise waterproofing, or to stop vermin entering. Standard flashings and cappings are available. (See below.) At the high end of roofing, wind can drive water uphill, under the flashing or capping, into a building. To minimise this problem, you turn up the valleys (or pans) at the high end of roofing. (The process is called turning-up (or stop-ending). Standard Flashings All roofing on low slopes (≤25º) should be turned-up. During the turn-up operation,...

Product Descriptions Disclaimer, warranties and limitation of liability All descriptions, specifications, illustrations, drawings, data, dimensions and weights contained this catalogue, all technical literature and websites containing information from BlueScope Lysaght are approximations only. They are intended by BlueScope Lysaght to be a general description for information and identification purposes and do not create a sale by description. BlueScope Lysaght reserves the right at any time to: This publication is intended to be an aid for all trades and professionals involved with specifying...