BLÜCHER® Separators Product Catalogue for grease separators STAINLESS STEEL DRAINAGE SYSTEMS

Installation Guidelines BLÜCHER Grease Separators should ideally be placed no further than 6-8 metres from the last fixture discharging into the unit. Provided the falls are adequate, this will reduce the likelihood of grease solidifying in the pipework system before reaching the separator. Waste from macerators and peelers should not normally be discharged into the separator as this will result in a rapid build up of sludge, necessitating more frequent emptying. A. Sinks Volume of sink (s) CC = Litres Reduce by 40% to allow for displacement, frequency of discharge etc. A + B = Total volume of...

With 40 years experience in the manufacture of stainless steel drainage products, BLÜCHER Grease Separators have been developed in co-operation with some of the leading authorities in the subject of environmental pollution control. Outlet comes with built in rodding point Curved profiled edges and corners prevent waste build up and ease cleaning process Inlet has removable baffle Socket inlet and outlet are recessed to save installation space Height adjustable legs (above ground seperators only) Effective Grease Control How a BLÜCHER Grease Separator works BLÜCHER Grease Separators are a modern...

At BLÜCHER we are more than 350 employees. Through know-how, dedicated service and common sense we develop, produce and market high-quality stainless steel drainage solutions for customers within the housing, commercial, industrial and marine sectors all over the world.   GRC - 200.01.12     24024     Copyright by BLÜCHER Find your local BLÜCHER specialist at www.blucher.co.uk BLÜCHER · Pugdalvej 1 · DK-7480 Vildbjerg · Tel.: +45 99 92 08 00 · [email protected] · www.blucher.com    A Division of