Facet - Maintenance Guide

Product catalog summary

Cleaning Instructions:
The Bloomming Facet requires periodic cleaning to prevent dirt buildup. Dust can be removed through normal dusting. For dirt removal, use a soft cloth or sponge with a mild soap or liquid detergent solution. Always blot dry with a damp cloth to avoid scratches and static charge. Avoid using scrapers, squeegees, or strong solvents like gasoline, benzene, acetone, and others.

Do Not:

Use strong solvents or abrasive cleaning agents.
Clean in direct sunlight or at high temperatures.
Rub with a dry cloth.

Conduct short-term tests to ensure compatibility of cleaning materials, but note that favorable short-term results do not guarantee long-term compatibility.

Inspection Instructions:
Regularly inspect your room divider to ensure all facet-shapes are properly closed at all 12 lock points. If not, the frame may not be secure and could fall apart. If a facet-shape does not close properly, it may be due to a frame connector not fully inserted into its tube. To fix this, open the facet-shape, fully insert the connector, and close it again. If the connector continues to slide out, use a pincer to slightly squeeze the aluminum tube to secure it.

For further information or questions, visit bloomming.com.

Catalog excerpts

MAINTENANCE GUIDE GUÍA DE MANTENIMIENTO · WARTUNGSHINWEISE · GUIDE DE MAINTENANCE ONDERHOUDSGIDS · GUIDA ALLA MANUTENZION

Open the catalog to page 1

Inspect your room divider from time to time. Make sure that all facet-shapes are closed correctly. If a facet-shape isn’t closed over the whole side (all 12 lock points), please close the facet-shape, otherwise the frame will not be secured and may fall apart. Inspecciona tu separador de ambientes de vez en cuando. Asegúrate de que todas las facetas están cerradas correctamente. Si una faceta no está cerrada por completo (los 12 puntos de cierre), por favor, ciérrala, de lo contrario, el marco no estará asegurado y puede desmoronarse. If a facet-shape doesn’t close properly, this is occurred...

Open the catalog to page 2

Überprüfen Sie Ihren Raumteiler von Zeit zu Zeit und stellen Sie sicher, dass alle Facettenformen korrekt geschlossen sind. Wenn eine Facettenform nicht über die gesamte Seite (alle 12 Verriegelungspunkte) geschlossen ist, schließen Sie bitte die Facettenform, da sonst der Rahmen nicht gesichert ist und auseinanderfallen kann. Contrôlez de temps en temps votre séparateur de pièce. Assurez-vous que toutes les formes à facettes sont correctement fermées. Si une forme à facettes n’est pas fermée sur tout le côté (les 12 points de verrouillage), veuillez fermer la forme à facettes, sinon le cadre...

Open the catalog to page 3

Inspecteer uw kamerscherm van tijd tot tijd. Zorg ervoor dat alle facetvormen correct zijn gesloten. Als een facetvorm niet over de hele zijde gesloten is (alle 12 sluitpunten), sluit dan de facetvorm, anders zit het frame niet vast en kan het uit elkaar vallen. Ispeziona il tuo divisorio di tanto in tanto. Assicurati che tutte le faccette si chiudano correttamente. Se una faccetta non è chiusa su tutti i 12 punti di chiusura, il telaio non sarà fissato e potrebbe smontarsi. Als een facetvorm niet goed sluit, komt dit doordat een frame connector niet volledig in de buis is gedrukt. Se una faccetta...

Open the catalog to page 4

All Bloomming catalogs and technical brochures

Facet - The elegant room divider
12 Pages