Electric Tilting Skillet with Manual Tilt Model Shall be a Crown model, electrically heated skillet with manual tilt, c-CSA-us and NSF certified. The unit shall have a spring assisted stainless steel cover, with full width handle, no drip condensate guide, etched gallon markings, and vent port with swing cover. The pan shall have a sloped front and be front hinged for easy tilting pour control and comes complete with a removable pour strainer. Pan is formed from 10 gauge stainless steel with a #4 finish exterior and polished interior with coved corners for easy cleaning. Heating shall be accomplished by electric elements cast embedded in a full 1-3/8" (35 mm) thick aluminum casting bolted to the underside of the pan for even heat distribution across the entire surface. The pan shall be mounted on a heavy duty welded frame with stainless steel exterior supported by an all welded 1-5/8" (41 mm) stainless steel pipe frame with adjustable bullet feet and rear legs fitted with flange adjustable feet for securing to the floor. Unit shall have a permanently lubricated, self-contained gear box tilt mechanism to allow the pan to tilt forward for complete emptying of contents. The controls enclosure shall be designed to meet NEMA-2 and provide a degree of protection against dripping and light splashing and shall include a thermostat with OFF position and a range of 160°F - 445°F (71°C - 229°C) a thermostat indicator light, pan tilt switch that shuts elements off if tilted more than 5°, and high temperature cut-off set at 536°F (280°C). V___ OPERATION SHALL BE BY: Electric heating elements equipped for operation on: □ 208 VAC, 1 phase, 50/60 Hz □ 208 VAC, 3 phase, 50/60 Hz □ 220 VAC, 1 phase, 50/60 Hz □ 220 VAC, 3 phase, 50/60 Hz □ 240 VAC, 1 phase, 50/60 Hz □ 240 VAC, 3 phase, 50/60 Hz □ 380/220 VAC, 3 phase, 50/60 Hz □ 415/240 VAC, 3 phase, 50/60 Hz OPTIONAL ITEMS AT EXTRA COST: □ 380 VAC, 3 phase, 50/60 Hz □ 415 VAC, 3 phase, 50/60 Hz □ 480 VAC, 3 phase, 50/60 Hz □ 600 VAC, 3 phase, 50/60 Hz □ Etched liter markings (LMS-30, LMS-40) □ 2" draw off valve with strainer, side mounted (TVT-2BP) □ 3” draw off valve with strainer, side mounted (TVT-3BP) □ Correctional Package □ Sliding drain pan (S-SDP-2) ACCESSORIES: □ Pan carrier (PC-1) □ Steam pan insert (SPI-30, SPI-40) □ 12” Single pantry faucet with swing spout (SF-12) □ 12” Double pantry faucet with swing spout (DF-12) □ 3” Stainless steel faucet plumbing enclosure (SPE-1) □ Single pantry faucet & bracket with 60” pot filler (SF-60) □ Double pantry faucet & bracket with 60” pot filler (DF-60) □ Half size pan carrier for ES-30 when TVT ordered □ Faucet bracket (FB)

amm wmi ■1 fOWlir SfittR) S7/16T JflmmJ ihOLES ON [72mm] D.C. UTILITY INFORMATION Amps Per Line WATER: Optional faucets require 3/8" (10mm) outside-diameter tubing connection to base of each faucet. INTENDED FOR COMMERCIAL USE ONLY. NOT FOR HOUSEHOLD USE. t^N 70 Oakdale Road, Toronto ON, Canada M3N IV9 (919) 762-1000 www.crownsteamgroup.com