- Catalogs
- Blauberg Ventilatoren GmbH
- Industrial ventilation
Industrial ventilation
Industrial ventilation
Blauberg Ventilatoren is committed to providing high-quality ventilation products tailored to diverse client needs globally, emphasizing long-term relationships and inviting clients to their Munich showroom.
The catalogue lists various ventilation products, including inline, exhaust, sound-insulated, centrifugal, axial, and roof fans, along with accessories. Each category includes specific models and air capacity ranges.
Systems are categorized by air motion type (natural/mechanical), purpose (supply/exhaust/air handling with heat recovery), air exchange arrangement (local/general), and design (kit/monoblock).
Proper ventilation is crucial for indoor air quality, health, and comfort, focusing on oxygen-carbon dioxide balance, harmful substance concentrations, smell, humidity, temperature, and air motion.
Ventilation equipment selection is based on volumetric air flow, operating pressure, noise level, and electric heater power, with calculations tailored to room sizes and conditions.
- Air Capacity Calculation: Based on air exchange rate per person, adjusted for pollution.
- Volumetric Air Flow: Calculated for pollutant removal, humidity, and heat excess.
- Operating Pressure and Air Speed: Calculated considering duct design factors.
- Electric Heater Power: Based on system capacity, supply air temperature, and outdoor temperature.
- Noise Levels: Reduced by quieter models or silencers, with acoustic calculations recommended.
- Fan Types: Classified into axial, mixed-flow, centrifugal, and tangential types.
- Fan Applications: Categorized into multi-port, inline, and roof fans for specific requirements.
Discusses asynchronous electric motors, highlighting short circuit and phased modifications, with short circuit motors preferred for simplicity and efficiency.
Asynchronous motors with external rotors offer compact size and air cooling, suitable for a wide temperature range, with integrated overheating protection and controllable speed.
EC motors are efficient, energy-saving, and feature low noise levels with smart functions enabled by an electronic EC-controller.
Emphasizes speed control importance in ventilation systems, discussing thyristor, transformer, and frequency control methods.
Details protection ratings against particles and liquids, following the IP code system.
Outlines compliance marks indicating conformity to quality and safety standards across various regions.
BLAUBERG units are designed for polluted and humid environments, featuring thyristor and transformer speed controllers, with casings made from various materials.
Units can include heaters, energy recovery units, filters, and by-pass ducts, designed for easy mounting and servicing.
Offers air capacities up to 1750 m3/h, suitable for various premises, with a double-speed motor and thermal overload protection.
Provides air capacities up to 1700 m3/h, designed for compact spaces with smooth speed control options.
Includes detailed specifications like voltage, power, current, air capacity, RPM, sound pressure levels, and ingress protection ratings.
Details specifications for Iso-B and Iso-V fans, including voltage, power, air capacity, and sound pressure levels.
Provided across octave-frequency bands for different fan models.
Fans feature aluminum frames with removable panels, suitable for inline or 90° angle air flow.
Equipped with asynchronous motors with external rotors and centrifugal impellers.
Fans can be mounted with rectangular or round air ducts, with outdoor mounting options available.
High-powered motor options available, suitable for noise-sensitive environments.
Designed for energy-saving and controllable ventilation systems.
Includes detailed dimensions and weights for various fan models and accessories.
Details specifications for Iso-V EC, Iso-ZS, Iso-K, and Helix models, including voltage, power, air capacity, and sound pressure levels.
All models feature sound and thermal insulation, vibration-damping mounts, and thermal protection.
Fans can be mounted in various positions, compatible with round and rectangular air ducts.
Details specifications for Helix and S-Vent series, including pressure, air capacity, power, and sound pressure levels.
Provided for different octave-frequency bands for various fan models.
Fans are designed for exhaust ventilation systems, compatible with round and rectangular air ducts.
Equipped with three-phase asynchronous motors with centrifugal impellers.
Fans can be installed as single units or part of larger systems, with accessories like anti-vibration mounts available.
Includes detailed dimensions for each fan model.
Provides detailed specifications and usage guidelines for S-Vent, Tubo-M, Axis-F, and Axis-Q models.
Details specifications for S-Vent, Tubo-M, Axis-F, and Axis-Q series, including power, dimensions, and air capacity.
All models feature external terminal blocks for power connection and integrated thermal protection.
Sound pressure levels and sound power levels detailed for each model.
Ideal for boosting air volumes in systems with low aerodynamic resistance.
Details specifications for Axis-Q, Axis-QR, Axis-QA, Axis-QRA, and Tower-V series, including voltage, power, air capacity, and sound pressure levels.
Provided across octave-frequency bands for different fan models.
Axis-Q and Axis-QR designed for supply and exhaust ventilation systems, Tower-V for roof mounting.
Fans designed for wall or roof mounting, with specific mounting plates and flanges.
Detailed dimensions and weights provided for each fan model.
Includes voltage, power, air capacity, sound pressure level, and ingress protection rating.
Serves as a comprehensive guide for selecting appropriate fan models based on ventilation needs.
Features steel casing with polymer coating, designed for vertical air exhaust and continuous operation.
Equipped with asynchronous motors with external rotors and backward curved blades.
Controlled smoothly with an external thyristor controller or in steps with an auto transformer.
Designed for roof mounting directly above a ventilation shaft or air duct.
Models vary in voltage, power, air capacity, RPM, sound pressure level, and operating temperature.
Provided for various octave-frequency bands.
Offer high efficiency, reduced energy demand, and low noise levels.
Vary across models, with detailed measurements provided.
Suitable for exhaust ventilation systems in various premises.
Details specifications for Tower-H, Tower-V, Tower-AM, and Tower-A models, including voltage, power, air capacity, and sound pressure levels.
Provided for different octave-frequency bands.
Features steel casing with polymer coating, designed for horizontal air exhaust.
Uses high-efficient EC motors with external rotors and backward curved blades.
Controlled via a 0-10 V external control signal.
Mounted on roofs directly above ventilation shafts or air ducts.
Suitable for exhaust ventilation systems in various premises.
Details specifications for Kamin and Kamin-ER series fans, including sound-power levels, operating temperatures, and duct compatibility.
Kamin series suitable for distributing warm air from chimney rooms.
Uses single-phase asynchronous motor with centrifugal impeller.
Can be mounted in any position, compatible with various options.
Designed for exhaust ventilation in high-rise buildings.
Includes detailed dimensions and installation instructions.
Provides pressure and air capacity data for various fan models.
Charts included for calculating basic ventilation shaft diameter.
Details specifications for Valeo-BP and Valeo-BF models, including sound-power levels and operating temperatures.
Designed for flush wall or ceiling mounting, with features like gravity backdraft damper.
Includes step speed control and programmable controls.
Installed during general construction works, connecting to main ventilation shaft.
Offers air capacities up to 150 m3/h with pressure performance up to 270 Pa.
Example provided for high-rise mono-pipe ventilation system arrangement.
Describes various models of Valeo exhaust fans and ventilation components.
Details specifications for Valeo-E fans and ALBE units.
Includes mounting frames and backdraft dampers.
Provides pressure and air flow data for different fan models.
Design includes galvanized steel flanges and nylon reinforced polyethylene fabric.
Made of galvanized steel, connects to fans or other parts with bolts.
Heats supply air in HVAC systems, compatible with ducts Ø100 to 315 mm.
Warms supply air in ventilation systems, suitable for indoor and outdoor use.
Provides guidelines for determining air speed, supply air temperature, heating coil capacity, water flow, and pressure drop.
Outlines multiple scenarios with varying air flow rates, outside air temperatures, and water temperatures.
Includes air speed inside coil, supply air temperature, heating coil capacity, water flow, and water pressure drop.
Emphasizes accurate diagram instructions for correct calculations.
Includes water heater and cooling unit diagrams for determining system parameters.
Ensure proper air flow distribution and stabilization, use antifreezing solutions for outdoor installations.
Includes detailed dimensions and specifications for KWK cooling units.
Used to determine cooling system parameters based on air flow and outside air conditions.
Includes calculations for air flow, supply air temperature, cooling coil capacity, water flow, and pressure drop.
Used for direct expansion systems, determining supply air temperature, cooling coil capacity, refrigerant consumption, and pressure drop.
Cooling units designed with galvanized steel casing and copper tubes with aluminum plates.
Various models available with specific dimensions.
Includes sample parameters and calculations for supply air temperature, cooling coil capacity, refrigerant consumption, and pressure drop.
Regulates heating medium flow and maintains supply air temperature.
Attenuates noise in ventilation systems, compatible with round and rectangular ducts.
Manual and automatic regulation of air flow in ducts.
Details specifications for air flow control devices, including electric actuators, shutters, dampers, and filter boxes.
Outlines compatibility with electric actuators and voltage requirements.
Describes design and intended use of each device.
Emphasizes proper space and alignment for functionality.
Designed for air purification in ventilation systems, with replaceable filter cartridges.
Comprehensive guide for selecting and installing air flow control devices in ventilation systems.
Designed for purifying supply or exhaust air, protecting equipment from dust pollution.
Made of galvanized steel with airtight connections and replaceable filter cartridges.
Can be mounted in any position using clamps or flange connections.
Replaceable filter cartridges available in various filtering classes.
Includes control unit MCD 60/0.3, sensor speed switch SGR-3/1, thyristor speed controller CDT E1.8, and speed control for EC motors CDT E/0-10.
Controls fan speed and on/off switching for single-phase motors.
Automatic/manual temperature control in HVAC systems.
Provides safe 12V power supply for fans.
On/off and speed selection for multi-speed fans.
Automatic fan regulation with timers and sensors for humidity, light, and motion.
Controls air dampers in ventilation systems.
Catalog excerpts
ABOUT B LAU BERG Blauberg Ventilatoren is a future- and client-orientated company, which stands for innovative technology and timeless design for the ventilation industry. With a great range of the fans and ventilation accessories Blauberg is represented in more than 20 countries. We are ready to offer you the most complete product range at the ventilation market, starting with domestic fans, including accessories for single-room ventilation with heat recovery and industrial fans and finishing with individually designed ventilation units and systems.
Open the catalog to page 2
Due to our product diversity, we do our best to meet the individual needs of our clients in various countries with the best combination of price and quality. Our philosophy is to cultivate long-term client relations and partnerships by high quality and reliability. Blauberg Ventilatoren always opened for the clients. You are welcome to visit our attractive show room in the distribution center in Munich to evaluate the Blauberg program and to review the operating units. Registration at [email protected]
Open the catalog to page 3
Inline fans Exhaust fans Sound-insulated fans Axial fans Roof fans Inline fans for rectangular ducts Сhimney fans Exhaust fans for mono-pipe ventilation Units for air cooling and heating 160-177 Electrical accessories
Open the catalog to page 5
24 INLINE CENTRIFUGAL FAN WITH EC MOTOR 46 SOUND‐INSULATED INLINE MIXED‐FLOW FAN 58 SOUND‐INSULATED EC FAN WITH EC MOTOR
Open the catalog to page 6
Tubo-M / Tubo-MZ 110 ROOF CENTRIFUGAL FAN WITH EC MOTOR CENTRIFUGAL ROOF FANS 116 ROOF CENTRIFUGAL FAN WITH EC MOTOR 134 CENTRIFUGAL FAN FOR RECTANGULAR DUCTS
Open the catalog to page 7
CENTRIFUGAL FAN WITH EC MOTOR FOR RECTANGULAR DUCTS INLINE CENTRIFUGAL FAN WITH EC MOTOR CENTRIFUGAL FAN FOR RECTANGULAR DUCTS Kamin / Kamin-ER MONO‐PIPE VENTILATION EXHAUST CENTRIFUGAL FAN MONO‐PIPE VENTILATION EXHAUST CENTRIFUGAL UNIT MONO‐PIPE VENTILATION EXHAUST CENTRIFUGAL FAN MONO‐PIPE VENTILATION EXHAUST CENTRIFUGAL FAN UNITS FOR AIR COOLING AND HEATING MOUNTING FRAME FOR ROOF FANS MRDL / MRIDL BACKDRAFT DAMPER FOR ROOF FANS FLEXIBLE CONNECTOR FOR ROOF FANS COUNTERFLANGE FOR ROOF FANS DUCT ELECTRICAL HEATER DUCT WATER HEATER DUCT ELECTRICAL HEATER
Open the catalog to page 8
DUCT WATER HEATER DUCT WATER COOLING UNIT DUCT DX COOLING UNIT WATER MIXING UNIT FLEXIBLE SILENCER GRAVITY DAMPER GRAVITY DAMPER FLEXIBLE ANTI‐VIBRATION CONNECTOR FLEXIBLE ANTI‐VIBRATION CONNECTOR
Open the catalog to page 9
BACKDRAFT DAMPER WITH SPRING FLEXIBLE ANTI‐VIBRATION CONNECTOR BACKDRAFT DAMPER BACKDRAFT DAMPER FILTER BOX WITH V‐FILTER FILTER BOX WITH BAG FILTER FILTER BOX WITH BAG FILTER CONTROL UNIT FOR RESIDENTIAL FANS SENSOR SPEED SWITCH SENSOR SPEED CONTROLLER MULTI‐SPEED SWITCH THYRISTOR SPEED CONTROLLER
Open the catalog to page 10
SPEED CONTROL FOR EC MOTORS THYRISTOR SPEED CONTROLLER SPEED CONTROL FOR EC‐MOTORS ROOM TEMPERATURE REGULATORS ROOM THERMOSTAT STEP‐DOWN TRANSFORMER STEP‐DOWN TRANSFORMER STEP‐DOWN TRANSFORMER MULTI‐SPEED SWITCH MULTI‐SPEED SWITCH TIMER / SENSORS ELECTRIC ACTUATOR TE/TI 1.5 HSE/HSI 1.5 LSE/LSI 1.5 IRSE/IRSI 1.5 ELECTRIC ACTUATOR ELECTRIC ACTUATOR ELECTRIC ACTUATOR
Open the catalog to page 11
WORLD OF VENTILATION Ventilation means controllable indoor air exchange including removal of stale air and supply of fresh, normally prepared air to the premises. Home dust, tobacco smoke, dust mites, household animals, consumer electronics, gas, finishing materials, carbon dioxide are only a few sources of indoor air pollution. The absence of proper ventilation may be the reason of allergic and asthmatic diseases, spread of infection, attenuation of immunity, bad smells and mould in the room. Quality indoor ventilation is the only solution that really helps you to prevent the above harmful factors....
Open the catalog to page 12
Calculation of volumetric air flow as per maximum allowable concentrations of harmful substances in air kmax-ka K: amount of pollutants per hour, in mg/h kmax: maximum permitted pollutant concentration, in mg/m3, see table 2 ka: pollution concentration in supply air, in mg/m3 (clean supply air ka = 0). Table 2. Maximum allowable concentrations of some substances Nitric acid Asbestos dust AEP: air exchange rate per person; P: number of people in the room - 20-25 m3/h per each person with low physical activity - 45 m3/h per each person with light physical activity - 60 m3/h per each person with...
Open the catalog to page 13
■ Operating pressure [Pa] and air speed Operating pressure and air speed are calculated based on an air duct design diagram. This diagram is then further worked out as air distribution network of the ventilation system. The required pressure for various ventilation calculated on the basis of diameter and length of the system components, number of bends and reducers as well as type of air distribution devices. The more elements the systems consists of, the longer the distribution net and the more bends and reducers the higher the is Air speed also depends on the air duct diameter. Static pressure...
Open the catalog to page 14
Electric heater power [kW]. Air heater is used in supply ventilation system for heating of supply air during cold seasons. Electric heater power is calculated on basis on ventilation system capacity, required supply air temperature and minimum outdoor temperature. Supply air temperature must be no less than +18°C. Electric heater power is calculated as follows: 3600 V : volumetric air flow [m3/h] tv: indoor air temperature [°C] tn: outdoor air temperature [°C] ρ : air density [kg/m3]; at 20 °C, ρ = 1.205 kg/m3 Cp: air heat capacity [kJ/kg·K], at 20°C, Cp=1,005 kJ/(kg·K) The minimum outdoor air...
Open the catalog to page 15
FAN TYPES A fan is a mechanical device designed for air transportation along ventilation air ductworks. Based on design and operating logic the fans are classified as follows: axial fans; mixed-flow fans (centrifugal and axial); centrifugal (radial); tangential (diametral). stretched air ducts with high air resistance in the network. These fans are suitable for mounting directly on exhaust air ducts. An axial fan consists of a wheel made of cantilevered blades (impeller) that are fixed on the hub at an angle to the rotation level. The wheel is located in a cylindrical casing. Impeller normally...
Open the catalog to page 16All Blauberg Ventilatoren GmbH catalogs and technical brochures
KOMFORT Ultra EC L2 3004 Pages
KOMFORT Ultra EC S2 3004 Pages
FRESHBOX 100 WIFI6 Pages
Brise Magic2 Pages
Brise2 Pages
Sileo V22 Pages
Smart2 Pages
Sileo2 Pages
Residential ventilation142 Pages
Air handling units150 Pages
Fans & motors20 Pages