video corpo

Monover

Monover

Monover

Product catalog summary
Description
The MONOVER membranes are waterproofing bitumen polymer membranes made with an elastomeric compound (BPE) that maintains flexibility at temperatures as low as -20°C. They are reinforced with spunbonded non-woven polyester and glass fiber threads. The MONOVER 4 MM P is available in a "TEX" version with a "DECOTEX" treatment, featuring a special black polypropylene tissue on the upper face.
Application
Application requires the use of personal protective equipment as per legal requirements. The surface must be cleaned before application. MONOVER is applied by flame using a gas propane blow torch to heat the lower face, which is covered with a special thermofusible film. The application temperature range is between +5°C and +35°C.
Recommended Use
MONOVER membranes are suitable for various structures, including base layers, basement structures, earth retention walls, and foundations. MONOVER MINERAL can be used as a top layer or a single layer.
Storage
Rolls should be stored in a warehouse, protected from sunlight, and at temperatures above +5°C. They should be kept upright, and stacking pallets, especially with slated membranes, should be avoided. It is recommended to use the product within 2-3 months of delivery.
Dimensional Features
The membranes are available in lengths of 10 m with a tolerance of 1%, widths of 1 m with a tolerance of 1%, and thicknesses of 4 mm with a tolerance of 0.4 mm. The weight per square meter for MONOVER MINERAL is 4.5 kg with a tolerance of 10%.
Technical Specifications
Key technical specifications include:
  • Watertightness: 60 kPa
  • Cold flexibility: -20°C
  • Tensile strength at breaking: 850 N/5 cm (L), 650 N/5 cm (T)
  • Elongation at breaking: 40%
  • Static load resistance: 20 Kg
  • Dynamic punching resistance: 1000 mm
  • Vapour permeability: µ 20000
Certifications
The quality system of Saint-Gobain PPC Italia S.p.A. is certified according to EN ISO 9001. The CE marking complies with the European Construction Products Regulation 305/2011, supported by certification no. 1370-CPR-0050.
See more

Catalog excerpts

Monover-1

Waterproofing bitumen polymer membrane Dimensional features Length Description The MONOVER membranes are realized with an elastomeric compound (BPE) having a -20°C cold flexibility. The reinforcement consists in a spunbonded non woven polyester reinforced with glass fibre threads. The MONOVER 4 MM P is also available in the “TEX” version with “DECOTEX” treatment, consisting in the application on the upper face of a special black polypropylene tissue. Application •Use Personal Protective Equipment as requested by law; •Clean properly the surface on which membranes has to be applied; •MONOVER is meant to be applied by flame with a gas propane blow torch by heating the lower face, covered with a special termofusibile film; •Apply between +5° C and + 35° C. Recommended Use The MONOVER membranes can be employed on structures of any type, like base layers, basement structures, earth retention walls and foundations. MONOVER MINERAL can be used as top layer or single layer. Storage Keep the rolls in warehouse, not exposed to the sun rays and at a higher temperature than +5°C. Keep the rolls in the upright position. If possible, avoid stacking pallets, especially with slated membranes. It is advisable to use the product within 2/3 months from delivery. CODE: STCBE 319 REVISION: 07 DATE: april 2016 Pag. 1 of 2 Isover Saint-Gobain §deiGKtaiiai0Saint-Gobain PPC Italia S.p.A. - Attivita Isover Headquarters: Via Ettore Romagnoli, 6 - 20146 Milano ir Service Bituver: Via G.Pastore, 15 - 66013 Chieti Scalo (CH) - Tel. 0871/599022 - Fax 0871/ 552483 www.bituver.it

 Open the catalog to page 1
Monover-2

Technical Commercial data Sheet The Saint-Gobain PPC Italia S.p.A. quality system is certified according to EN ISO 9001 Follow proper application and storage modalities. The CE marking of this bituminous membrane is in accordance with the European Construction Products Regulation 305/2011, is in agreement to the reference technical standards and is supported by certification no. 1370-CPR-0050. Saint Gobain PPC Italia has the right to change the technical data of this data sheet any time with no need of notice. CODE: STCBE 319 REVISION: 07 DATE: april 2016 Pag. 2 of 2 Isover Saint-Gobain §deiGKtaiiai0Saint-Gobain...

 Open the catalog to page 2

All Bituver catalogs and technical brochures

  1. Elastomat

    2  Pages

  2. Megaver

    2  Pages

  3. Fleximat

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.