Dimensional features Length Description The MEGAVER membranes are realized with a special compound based on bitumen modified with new generation elastomeric polymers (BPE), with -25°C cold flexibility. The reinforcement consists in a combination of polyester tissue-non-tissue and glass cloth. MEGAVER 4 MM P is also available in the “TEX” version with “DECOTEX” treatment, consisting in the application on the upper face of a special black polypropylene tissue. Application •Use Personal Protective Equipment as requested by law; •Clean properly the surface on which membranes has to be applied; •MEGAVER is meant to be applied by flame with a gas propane blow torch by heating the lower face, covered with a special thermofusible film; •Apply between +5° C and + 35° C. Recommended Use MEGAVER membranes are to be employed on several structure types. It is proper for base layers, basement structures, earth-retention walls and foundations. The MINERAL versions are meant to be used as finishing layer and/or as single layer. Storage Keep the rolls in warehouse, not exposed to the sun rays and at a higher temperature than +5°C. Keep the rolls in the upright position. If possible, avoid stacking pallets, especially with slated membranes. It is advisable to use the product within 2/3 months from delivery. CODICE: STCBE 001 REVISIONE: 05 DATA: april 2016 Pag. 1 di 2 Isover Saint-Gobain esocio ordinario del GBC Italia Saint-Gobain PPC Italia S.p.A. - Attivita Isover Headquarters: Via Ettore Romagnoli, 6 - 20146 Milano Customer Service Bituver: Via G.Pastore, 15 - 66013 Chieti Scalo (CH) - Tel. 0871/599022 - Fax 0871/ 552483

Technical Commercial data Sheet Megaver Technical features Test The Saint-Gobain PPC Italia S.p.A. quality system is certified according to EN ISO 9001 Follow proper application and storage modalities. The CE marking of this bituminous membrane is in accordance with the European Construction Products Regulation 305/2011, is in agreement to the reference technical standards and is supported by certification no. 1370-CPR-0050. Saint Gobain PPC Italia has the right to change the technical data of this data sheet any time with no need of notice. CODICE: STCBE 001 REVISIONE: 05 DATA: april 2016 Pag....