video corpo

Fleximat

Fleximat

Fleximat

Product catalog summary
Description
The FLEXIMAT membranes are waterproofing bitumen polymer membranes made with an elastomeric compound (BPE) that maintains flexibility at temperatures as low as -25°C. They are reinforced with spunbonded non-woven polyester and glass fiber threads. The FLEXIMAT 4 MM P version includes a 'TEX' variant with a 'DECOTEX' treatment, featuring a special black polypropylene tissue on the upper face.
Application
Application requires personal protective equipment and a clean surface. The membrane is applied using a propane blow torch to heat the lower face, which is covered with a thermofusible film. The application temperature range is between +5°C and +35°C.
Recommended Use
FLEXIMAT membranes are suitable for various structures, including base layers, basement structures, earth retention walls, and foundations. The FLEXIMAT MINERAL variant can be used as a top or single layer.
Storage
Store rolls in a warehouse, away from sunlight, and at temperatures above +5°C. Rolls should be kept upright, and stacking pallets should be avoided, especially with slated membranes. Use the product within 2-3 months of delivery.
Dimensional Features
Length: 10 m ±1%
Width: 1 m ±1%
Thickness: 3/4 mm ±0.4 mm
Weight per m² (MINERAL): 4.5 kg ±10%
Technical Specifications
Key performance metrics include watertightness (60 kPa), cold flexibility (-25°C), tensile strength (850 N/5 cm longitudinal, 650 N/5 cm transverse), and tear resistance (170 N). The membrane is resistant to static loads (20 kg) and dynamic punching (1000 mm).
Certifications
The quality system is certified according to EN ISO 9001. The CE marking complies with the European Construction Products Regulation 305/2011, supported by certification no. 1370-CPR-0050.
Notes
Saint-Gobain PPC Italia reserves the right to modify technical data without notice.
See more

Catalog excerpts

Fleximat-1

Technical Commercial data Sheet Dimensional features Length Description The FLEXIMAT membranes are realized with an elastomeric compound (BPE) having a -25°C cold flexibility. The reinforcement consists in a spunbonded non woven polyester reinforced with glass fibre threads. The FLEXIMAT 4 MM P is also available in the “TEX” version with “DECOTEX” treatment, consisting in the application on the upper face of a special black polypropylene tissue. Application •Use Personal Protective Equipment as requested by law; •Clean properly the surface on which membranes has to be applied; •FLEXIMAT is meant to be applied by flame with a gas propane blow torch by heating the lower face, covered with a special termofusibile film; •Apply between +5° C and + 35° C. Recommended Use The FLEXIMAT membranes can be employed on structures of any type, like base layers, basement structures, earth retention walls and foundations. FLEXIMAT MINERAL can be used as top layer or single layer. Storage Keep the rolls in warehouse, not exposed to the sun rays and at a higher temperature than +5°C. Keep the rolls in the upright position. If possible, avoid stacking pallets, especially with slated membranes. It is advisable to use the product within 2/3 months from delivery. CODE: STCBE 004 REVISION: 07 DATE: april 2016 PAGE 1 a 2 Isover Saint-Gobain §deiGKtaiiai0Saint-Gobain PPC Italia S.p.A. - Attivita Isover Headquarters: Via Ettore Romagnoli, 6 - 20146 Milano ir Service Bituver: Via G.Pastore, 15 - 66013 Chieti Scalo (CH) - Tel. 0871/599022 - Fax 0871/ 552483 www.bituver.it

 Open the catalog to page 1
Fleximat-2

Technical Commercial data Sheet The Saint-Gobain PPC Italia S.p.A. quality system is certified according to EN ISO 9001 Follow proper application and storage modalities. The CE marking of this bituminous membrane is in accordance with the European Construction Products Regulation 305/2011, is in agreement to the reference technical standards and is supported by certification no. 1370-CPR-0050. Saint Gobain PPC Italia has the right to change the technical data of this data sheet any time with no need of notice. CODE: STCBE 004 REVISION: 07 DATE: april 2016 PAGE 2 a 2 Isover Saint-Gobain §deiGKtaiiai0Saint-Gobain...

 Open the catalog to page 2

All Bituver catalogs and technical brochures

  1. Elastomat

    2  Pages

  2. Monover

    2  Pages

  3. Megaver

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.