Technical Commercial data Sheet Elastomat Waterproofing bitumen polymer membrane Dimensional features Length generation elastomeric polymers (BPE), with -20°C cold in the application on the upper face of a special black Description The ELASTOMAT membranes are realized with a special compound based on bitumen modified with new flexibility. The reinforcement is in polyester reinforced with glass cloth. The ELASTOMAT 4 MM P is also available in the “TEX” version with “DECOTEX” treatment, consisting polypropylenic tissue. Application •Use Personal Protective Equipment as requested by law; •Clean properly the surface on which membranes has to be applied; •ELASTOMAT is meant to be applied by flame with a gas propane blow torch by heating the lower face, covered with a special thermofusible film; •Apply between +5° C and + 35° C. Recommended Use The ELASTOMAT membranes are to be employed on several structure types. It is proper for base layers, basement structures, earth-retention walls and foundations. The MINERAL versions are meant to be used as finishing layer and/or as single layer. Storage It is advisable to keep the rolls in warehouse, not exposed to the sun rays and at a higher temperature than +5°C. Keep the rolls in the upright position. If possible, avoid stacking pallets, especially with slated membranes. It is advisable to use the product within 2/3 months from delivery. ELASTOMAT ELASTOMAT ELASTOMAT ELASTOMAT ELASTOMAT ELASTOMAT ELASTOMAT ELASTOMAT TYPE 3 MM P 4 MM P TEX 4 MM P MINERAL 4 KG P MINERAL 4,5 KG P MINERAL 5 KG P MINERAL 5,5 KG P MINERAL 6 KG P REINFORCEMENT Polyester Polyester Polyester Polyester Polyester Polyester Polyester Polyester UPPER FACING Sand Sand Polypropylene TNT Slate Slate Slate Slate Slate CODICE: STCBE 005 REVISIONE: 07 DATA: april 2016 Pag. 1 di 2 isover Saint-Gobain esocio ordinario deiGBC Italia Saint-Gobain PPC Italia S.p.A. - Attivita Isover Headquarters: Via Ettore Romagnoli, 6 - 20146 Milano Customer Service Bituver: Via G.Pastore, 15 - 66013 Chieti Scalo (CH) - Tel. 0871/599022 - Fax 0871/ 552483

Technical Commercial data Sheet The Saint-Gobain PPC Italia S.p.A. quality system is certified according to EN ISO 9001 Follow proper application and storage modalities. The CE marking of this bituminous membrane is in accordance with the European Construction Products Regulation 305/2011, is in agreement to the reference technical standards and is supported by certification no. 1370-CPR-0050. Saint Gobain PPC Italia has the right to change the technical data of this data sheet any time with no need of notice. of notice. CODICE: STCBE 005 REVISIONE: 07 DATA: april 2016 Pag. 2 di 2 Saint-Gobain...