BISOL EasyMountTM Slim & Twin Slim BASE Cost-effective & lightweight solution for hassle-free installations Technical Specifications BISOL EasyMountTM Slim BASE 100/200 BISOL EasyMountTM Twin Slim BASE Flat roofs with up to 5° roof inclination Direct laying without roof penetration Module incline 10° or 20° (other angles available upon request) Module orientation Length: Any / Width: up to 1,100 mm Frame thickness: 30, 35 or 40 mm (1.18” ,1.38” and 1.57”) used with corresponding clamp Module frame tolerances Material Basic construction parts: Aluminum EN-AW 6060 T6 / Fixation elements: Stainless steel A2-70 System weight without ballast Snow load per system 0 – 2.40 kN/m2 (with BISOL PV modules) Wind load (velocity) Additional stabilization Depending on project specifics. More information available upon request. Slim BASE Twin Slim BASE Maximum distance between modules’ rows Distance between modules installation guide video Fits most PV modules Adjustable distance between rows Cost-effective solution South-facing or east-west orientation Preassembled components for quick installation

Fun facts about BISOL EasyMount™ Slim and Twin Slim BASE The front and back rows of PV modules that are most exposed to the wind are connected to the inside of the array via longer profiles, which improves overturning resistance of the structure and thus reducing the required ballast and ensures more wind safety on the roof. The optional EPDM protective rubber will give your mounting structure additional elevation, which will improve the water drainage of your power plant. Potentially better friction coefficient between the power plant and the roof will enable you to use less ballast and cause...