BISOL EasyMount Hook with Profile 50 Double-adjustable solution for various types of tiled roofs BISOL EasyMount hook is a perfect solution for pitched roofs covered by any type of tile with the exception of barrel tiles. The double adjustability of the hook permiths use on roofs with large wave tiles, enables levelling out the uneven roof surfaces and provides more efficient cooling of the modules by lifting them further away from the roof surface. The system allows for portrait or landscape module orientation bymounting the profiles horizontally or vertically without the use of the grid Technical Specifications Application Any type of tiled roof (except for barrel tiles) Roof incline Module orientation Module frame tolerances Suitable for all framed module dimensions Maximum load on hook BISOL EasyMount hook 6-35: 120 kg (265 lbs) BISOL EasyMount hook 8-30: 200 kg (441 lbs) Snow load per system 0 – 5.40 kN/m2 (with BISOL PV modules) Stainless steel 1.4301 (hook) / Stainless steel A2-70 (fastening elements) / Aluminum EN-AW 6060 T5 (Profile 50) Height adjustability x Landscape orientation without use of grid -------------x -------------- BISOL EasyMount hook 6-35 BISOL EasyMount hook 8-30 Double height adjustable Suitable for most tiled roofs Efficient cooling Levelling out uneven roof surfaces

Recomended installation with BISOL PV modules A Spans between rafters C Module orientation Landscape Profile 501 / Grid (Profile 50 + Profile 50) For modules that can be mounted on the short frame side. System Components BISOL Hook is fixed to a rafter using four wood screws with EPDM washers. For portrait module orientation Profile 50 is mounted horizontally on the Hook. For landscape module orientation Profile 50 is mounted vertically on the Hook using BISOL EasyMount L-connector. For larger spans and landscape module orientation a grid is laid out by connecting two intersecting Profiles 50...