BISOL EasyMount HDPE Base 200 Quick and easy mounting solution for flat roofs BISOL EasyMount HDPE base 200 is a premium mounting solution for PV installations on flat roofs or surfaces. It requires no roof penetration and allows for the PV modules to be positioned at a 20° angle. The cutting edge mounting solution has been developed in-house and combines superior design with durability for extreme ease of installation and long-term performance. BISOL EasyMount HDPE base 200 is made of highest quality recyclable materials and will leave a positive mark on the environment. Frame width on the reverse side of the module (designed specially for BISOL modules): Technical Specifications Application Flat roofs Roof incline Module angle Module orientation Module frame tolerances Length: any / Width: 991 mm ± 5 mm (39.02” ± 0.2”) / Thickness: 40 mm ± 2 mm (1.575” ± 0.08”) / Reverse side width: 27 - 32 mm (1.06” - 1.26”) Base color Carbon black Base material High-density polyethylene - HDPE, carbon black, UV-resistant (base) / Glass fibre reinforced polypropylene (screws) Base weight Additional stabilization Ballast, Wind shields Temperature range Snow load per system Dimensions of HDPE Base 200: With the use of ballast and wind shields according to the specifications. 15-year UV and mechanical resistance guarantee Efficient cooling

Additional stabilization requirements for different wind velocities Basic wind velocity: 20 m/s (45 mph) Ballast Ballast & wind shields building height Basic wind velocity: 25 m/s (56 mph) Ballast Ballast & wind shields building height Wind loads calculated in accordance with Eurocode 1 (EN 1991-1-4). Information for additional wind zones available upon request. The use of HDPE bases 200 is not recommended. System Components The PV module is placed between two HDPE bases 200 into specially prepared grooves. Extra ballast can be placed at the bottom of the HDPE base 200. The polypropylene screws...