Catalogs >
BISOL >
BISOL EasyMount ALU Base

BISOL EasyMount ALU Base
2Pages

Catalog excerpts

BISOL EasyMount ALU Base Cost effective lightweight solution for hassle-free installations This lightweight, but sturdy mounting solution requires no roof penetration and is suitable for flat roofs covered with bitumen, gravel or synthetic membrane. The ALU base is delivered completely pre-assembled to simplify the installation work, as well as substantially reduce the installation time. Different solutions allow various module incline angles and are available as a south facing or east-west facing option. Technical Specifications BISOL EasyMount ALU Base 125/200/300 BISOL EasyMount ALU Twin Base 100 Flat roofs Roof incline Direct laying without roof penetration Module incline 12.5°, 20° or 30° (other angles available upon request) Landscape / Portrait upon request Module orientation Width: 991 mm (39.02”) / Reverse side width of the frame: 27 - 32 mm (1.06” - 1.26”) / Frame thickness: 35, 40 or 45 mm (1.38”, 1.57” or 1.77”) applicable to different clamp types Module frame tolerances Material Aluminum EN-AW 6060 T5 (L-profile) / Stainless steel A2-70 (fastening elements) System weight without ballast Snow load per system 0 – 2.40 kN/m2 (with BISOL PV modules) Wind load (velocity) Additional stabilization Ballast / Windshields Product name Distance from point A to point B(1) BISOL EasyMount ALU Base 125 BISOL EasyMount ALU Base 200 BISOL EasyMount ALU Base 300 BISOL EasyMount ALU Twin Base 100 (1) Layout example for optimal yield-to-installed power ratio in Central Europe. Adjustable upon request. Various incline angles Cost-effective solution Minimum tools required

Open the catalog to page 1

System Components Metal windshields can be installed to achieve better wind resistance. BISOL EasyMount ALU Base 125/200/300 PV modules are placed on the connectors and fixed into the pre-inserted nuts with middle or end clamps (35, 40 or 45 mm). The extension of Lprofiles can be achieved using the L-connectors. Additional ballast (concrete slabs) can be placed into specially prepared ballast pan fixed to the structure. BISOL EasyMount Twin ALU Base 100 Component description EasyMount ALU Twin Base 100 Clamp middle EasyMount Component description Load Concrete plate 40/40/4 cm (15kg) ©...

Open the catalog to page 2