FAST® Owner’s Manual FOR USE WITH MicroFAST NitriFAST HighStrengthFAST RetroFAST wastewater treatment systems wastewater treatment systems wastewater treatment systems wastewater treatment systems FAST Owner’s Manual © 2014 Bio-Microbics, Inc. Revised January 2014. FAST, MicroFAST, NitriFAST,

Dear FAST® System Owner Congratulations! You have a FAST® wastewater treatment system installed on your property. At the forefront of green technology, the FAST® System by Bio‐Microbics meets the highest industry treatment standards. Based on environmentally sound and simple scientific principles, the FAST® process is our continued commitment to improve small onsite treatment capabilities. You can take pride in knowing that, with the FAST® system, you will help ensure a clean environment for future generations. Please take time to read this FAST® Owner’s Manual, you will learn important safety precautions, ...

(NSF Std 40/245 cert.) MicroFAST 0.5, 0.625, 0.75, 0.9, 1.5 ® (Non‐NSF cert.) MicroFAST 3.0, 4.5, 9.0 ® (ETV/EPA tested) RetroFAST 0.150, 0.250, 0.375 ® NitriFAST 0.5, 0.625, 0.75, 0.9, 1.5, 3.0, 4.5, 9.0 ® HighStrengthFAST 1.0, 1.5, 3.0, 4.5, 9.0 All FAST® products are ETL certified for safety (electrical, environmental, etc.). One or more of the following patents protects this process: 3,966,599; 3,966,608; 3,972,965; 5,156,742. Certified by NSF International, the MicroFAST® 0.5, 0.625, 0.75, 0.9 and 1.5 systems meets NSF Standard 40, Class 1 and Standard 245 certifications ...

D.Vent(s) and Observation Port H.Outlet to Drain field Primary Zone Secondary Zone *PLEASE NOTE: Adequate pump out must be provided for primary and secondary zones. There may be ancillary equipment associated with your system: pump(s) (before and/or after the FAST® unit), a distribution box, a disinfection system, an irrigation system, a remote alarm, or auto dialer, etc. DO NOT ENTER THE SEPTIC TANK. Hazards exist in a septic system. All precautions must be followed when inspecting the system. Keep tank openings covered at all times. Failure to do so could result in severe sickness or death. Lethal gases, high voltage electricity, ...

1. Open the access ports/cover(s) and insert the hose. Be sure to pump out both settling and treatment chambers of the system. 2. Once the unit has been pumped out, immediately refill the tank with clean water to reduce the risk of the tank floating and to minimize the impact on treatment. Close the access ports/cover(s) making sure it is watertight. 3. Properly dispose of the solids in compliance with local and state regulations. SEASONAL/INTERMITTENT USE PROPERTIES FAST® wastewater treatment system will function normally during short periods of inactivity, even if there is no wastewater flowing to the system. The power to the system should ...

FAST® System Serial Number:_ System Designer Name:_ Designer Phone:_ Health Official Name:_ Health Official Phone: _ Manufacturer Name: Bio-Microbics. Inc._ Installer Phone:_ Maintenance Provider Name:_ Maintenance Provider Phone: MICROBICS BETTER WATER. BETTER WORLD. 8450 Cole Parkway • Shawnee, KS 66227 • USA Ph: 913-422-0707 • Fax: 913-422-0808 800-753-FAST (3278) • www.biomicrobics.com