RAW WOOD
48Pages

{{requestButtons}}

Catalog excerpts

RAW WOOD - 1

Solid Wood and Carvings in B&C production

Open the catalog to page 1
RAW WOOD - 2

With this PDF catalogue, we wish to highlight once again the peculiarity and uniqueness of the Bianchini & Capponi products and of the high-quality materials that are used for its furniture. Therefore, a selection of some of our bestselling vanities or mirrors is presented, focusing on their “raw” details. This makes it possible to better appreciate the manufacturing process as well as the quality of these products, which are still made with the techniques and the materials that were used when furniture was only made in solid wood. It is to be noted that only and exclusively with solid wood...

Open the catalog to page 2
RAW WOOD - 3

SOLID WOOD Nowadays we all talk about wood, but what we now find on the market can seldom be defined as “pure wood”: often it is only distantly related to the latter. Strictly speaking solid wood is the portion of wood that is extracted from the innermost part of a trunk, known as heartwood, far from the cortex and different from the outer portion (known instead as sapwood). But of course, all types of solid wood will have their own specific characteristics, grains and knots, depending on the type of tree from which they were obtained. The components into which solid wood is converted, for...

Open the catalog to page 3
RAW WOOD - 4

Why should you buy a piece of furniture made from solid wood? Wood is a beautiful, living, highly workable material which allows you to make carvings, frames and shapes, that cannot be achieved using other non-noble materials. Opting for a piece of solid wood furniture means choosing a quality product that is sturdy and will last over time. It also means opting for a high value product made from a fine natural material. A piece of furniture made from solid wood cannot be compared with furniture made from other materials, both as regards materials and aesthetics. For centuries, furniture has...

Open the catalog to page 4
RAW WOOD - 5

Maintenance of a piece of furniture in solid wood Polish it periodically with neutral beeswax, which is a completely natural product. For centuries it has been a recommended furniture care product as it provides deep-down nourishment for wood. It is necessary special care that creates and maintains a protective film throughout the years that, over and above preserving the surfaces, enhances the natural beauty of your furniture. The wax should be evenly applied using a soft woollen cloth. Let it dry for a few minutes and then polish with a dry preferably warm woollen cloth. If you keep the...

Open the catalog to page 5
RAW WOOD - 19

Bianchini (j^Capponi

Open the catalog to page 19
RAW WOOD - 23

Bianchini (j^Capponi

Open the catalog to page 23
RAW WOOD - 46

Fregio (per testiera letto)

Open the catalog to page 46

All BIANCHINI & CAPPONI catalogs and technical brochures

  1. PORTE

    34 Pages

  2. CRISTALLO

    15 Pages

  3. NEOCLASSICO

    26 Pages

  4. URBAN CHIC

    13 Pages

  5. DIAMANTATA

    20 Pages

  6. BOMBATA

    17 Pages

  7. Toscana

    76 Pages

  8. Materia

    50 Pages

  9. Fashion

    38 Pages

  10. Etnica

    44 Pages

  11. Linea DECO

    64 Pages

Archived catalogs

  1. Porte

    70 Pages