Effectively innovative. BG slot channels - the solid drainage system! Drainage systems

BG slot channels — high resilience — high performance! The BG slot channel is a highly stable nished part made of reinforced concrete. These products have been produced at in the Czech Republic for decades. CS-BETON has been an international partner of BG in Europe for many years. Made by Benefits & advantages. various channel profiles for any usage area Channels with or without 0.5 % internal slope Element lengths 4000 mm - special lengths on request Expansion joint possible directly on the channel Drainage channels with or without border Manufacturer with decades of experience produced and...

BG slot channels - concrete channels with lots to offer! Channels with or without surface slope available. Optimum water absorption thanks to 3 % slope to the slot Unique slot geometry - appropriate for all uses interrupted slot reinforced with stabiliser bars Tongue and groove system for each channel element Channels with a border can be used for drainage along pavements, in tunnels and when there are rising edges Supplied gaskets have to be installed on site and ensure a tight connection in the channel joint Highly resilient due to the high concrete strength (>=C40/50) and the steel reinforcement...

BG slot channel - profile T-1 The „smallest“ in the range. Quick and effective drainage is guaranteed due to the special shape of the inner profile. The profile T-1 slot channel is mainly used in areas where a low installation height is required. This channel type can also be installed in public traffic areas, e.g. with pedestrian zones where bikes are used, without restriction. Benefits & advantages. Element length 4 m - without internal slope Inner diameter: 18 x 13 cm with interrupted slot - slot width 18 mm Drainage cross section: 187 cm² 3 % surface slope to the slot resilient up to class...

>> BG slot channel, profile T-1, DN 18x13 interrupted slot, inner diameter 18 x 13 cm, without slope, class D 400 kN BG slot channel, profile T-1, type T18/13, without slope Cleaning element (tongue-groove) incl. ductile iron cover Cleaning element (tongue-tongue) incl. ductile iron cover Sump unit (tongue-groove) with outlet incl. ductile iron cover Sump unit (groove-groove) with outlet incl. ductile iron cover Shaft bottom for sump unit with outlet DN 150 incl. Forsheda sealing Fire protection element (tongue-groove) Front cap (tongue) End cap (groove) Lifting grab for profile T-1, consisting...

BG slot channel - profiles I-1, I-3 and I-5 The „most versatile“ in the range. These slot channels are available in the most wide-ranging designs, and therefore are the most frequently used. Available with or without inner slope, with continuous, interrupted or covered slot, with or without border, and in the most wide-ranging diameters. These channel profiles are mainly used in motorway construction (hard shoulder/central reservation and tunnels), container terminals, industrial and port facilities and aviation areas. Benefits & advantages. Element length 4 m - with or without 0.5% internal...

>> BG slot channel, profile I-1, DN 20x30 interrupted slot, inner diameter 20 x 30 cm, with or without slope - class E 600 kN BG slot channel, profile I-1, type T30/30, without slope BG slot channel, profile I-1, type G28/30, with 0,5 % slope BG slot channel, profile I-1, type G26/28, with 0,5 % slope BG slot channel, profile I-1, type G24/26, with 0,5 % slope BG slot channel, profile I-1, type G22/24, with 0,5 % slope BG slot channel, profile I-1, type G20/22, with 0,5 % slope BG slot channel, profile I-1, type T28/28, without slope BG slot channel, profile I-1, type T26/26, without slope BG...

>> BG slot channel, profile I-3, DN 20x30 continuous slot, border 12 cm left, DN 20 x 30 cm, with or without slope, class D 400 kN profile I-3 border left 400 30 item no. BG slot channel - profile I-3 - border 12 cm right Cleaning element (tongue-groove), type T30/30 incl. ductile iron cover Cleaning element (tongue-groove), type T30/30 incl. plastic cover Cleaning element (tongue-tongue), type T20/20 incl. ductile iron cover Cleaning element (tongue-tongue), type T20/20 incl. plastic cover Sump unit (tongue-groove), type T30/30 with outlet, ductile iron cover Sump unit (tongue-groove), type...

>> BG slot channel, profile I-5, DN 20x30 covered/continuous slot, border 12 cm left, DN 20 x 30 cm, with or without slope, class D 400 kN profile I-5 border left 400 185 item no. BG slot channel - profile I-5 - border 12 cm right Cleaning element (tongue-groove), type T30/30 incl. ductile iron cover Cleaning element (tongue-groove), type T30/30 incl. plastic cover Cleaning element (tongue-tongue), type T20/20 incl. ductile iron cover Cleaning element (tongue-tongue), type T20/20 incl. plastic cover Sump unit (tongue-groove), type T30/30 with outlet, ductile iron cover Sump unit (tongue-groove),...

BG slot channels - profiles II-1 and III-1 The „most powerful“ in the range. Slot channels with profile II-1 or III-1 have a large drainage cross section and are used in areas with high hydraulic requirements. They ensure controlled surface drainage and are successfully used, mainly in aviation areas, container terminals and industrial or port facilities. Benefits & advantages. Element length 4 m - without internal slope Inner diameter: 30 x 30 or 30 x 40 cm with interrupted slot - slot width 30 mm Drainage cross section: 706 cm² for 30x30 or 1.006 cm² for 30x40 3 % surface slope to the slot...

>> BG slot channel, profile II-1, DN 30x30 interrupted slot, inner diameter 30 x 30 cm, without slope - class D 400 or F 900 kN item no. BG slot channel - profile II-1 - class D 400 kN 50021000 BG slot channel, profile II-1, type T30/30, without slope Cleaning element (tongue-groove) incl. plastic cover Cleaning element (tongue-groove) incl. ductile iron cover Cleaning element (tongue-tongue) incl. plastic cover Cleaning element (tongue-tongue) incl. ductile iron cover Sump unit (tongue-groove) with outlet incl. plastic cover Sump unit (tongue-groove) with outlet incl. ductile iron cover Sump...