IPE & IPE Pro+ / TECHNICAL FILE
3Pages

TECHNICAL FILE (Electromagnetic Polarity Inverter) Lighter Smaller Compact This system emits audio frequencies (very low frequencies) that have no effect on users’ health. Their emissions do not exceed those from domestic appliances such as a washing machine, hair dryer, refrigerator, electric oven and microwave oven. CONSUMPTION The I.P.E® must be connected permanently, however its consumption is very low 0.75W (on average EUR 15 per year). It is supplied with a 12V, 1.5A power supply adapter for all the I.P.E® and I.P.E® Pro+ models, except for the I.P.E® Low 28 (4.5V, 0.25A). Easy and quick installation with no equipment required. The I.P.E® operates at very low frequency, that is then propagated in all solid materials within the dwelling. The device comes with a manufacturer’s guarantee of 30 years and its power supply adapter is guaranteed for

TECHNICAL FILE THE I.P.E® CONSIDERATIONS & PRECAUTIONS The system must operate continuously to obtain optimum performances from the device. The I.P.E® is designed to operate indoors. Several I.P.E® devices must not be installed in the same dwelling. It must not be heated by a heating system or direct solar radiation. The maximum usage height of the device is 2000 m. The device connection plug must be easily accessible. The I.P.E® should be cleaned only with a cloth. IMPORTANT PRECAUTIONS It is important to place the device in a position where the action range of the system covers the...

TECHNICAL FILE THE I.P.E® INSTALLATION The device is supplied with a separate power supply adapter, and its specific dowels and screws. • A drill bit number 5 or 6 (I.P.E® installation) and a drill bit number 7 (I.P.E® Pro  installation) are + necessary to install the device. • The holes are drilled according to the length between the 2 holes on the back of the device and at 35 cm to 65 cm high from the ground level. • The dowels and screws provided by the supplier must be used to install the device on the load bearing wall. The I.P.E® model provides two screws to be placed at a distance of...