New Betoatlas ®
4Pages

Applications Terraced walls vertical walls Slope stabilisation Railway walls Earth retaining walls Noise bunds Technical features Weight of full element: 50 kg Facility and rapidity combined Betoatlas® replaces traditional walls that require extensive temporary works that inconvenience and delay construction. The 23kg weight of each unit enables easy positioning even in difficult locations. Plantable units and molded aspect are provided in through coloured concrete. Vertical wall molded aspect System patented, trademark and design registered. Reproduction, even partial prohibited without permission. Information is given in good faith but is subject to change without prior notice. Vertical wall plantable

Sold on request with specific study for each structure Natural ground Drainage to heel or drainage at intervals throughout the height of the wall Frost free Possibility of several angles from the vertical Full connectivity due to double interlocking patented system providing high resistance Variable inclination Elements assembled completely dry except for the foundation base Possibility to build walls on sites inaccessible to machinery Tools Required: bolster chisel, lump hammer, string line, tape measure, spirit level Reinforced concrete foundation Manually portable Betoatlas® walls are...

BETOATLAS® Variable height Variable height Frost free The natural angles of the wall are vertical or -15 degrees. For additional resistance units can be rotated to a shallower angle. Reinforced concrete foundation The double interlocking provides full BETOATLAS Variable height connectivity avoiding all horizontal or lateral variable inclination sliding. This method can also be utilised to follow the natural slope of the terrain Frost free variable inclination Reinforced concrete foundation Natural ground Construction with or without BETONAP® Inclination to the horizontal variable Variable...

Nord-Est- France Tunis Airport - Tunisia The land on which the structure will be assembled must be verified by an Approved Geotechnical Engineer to validate the design. Our responsibility is limited to products provided. The quality of foundation soil, slope faces, backfill and the installation are the responsibility of the Employer or Contractor and under no circumstances BETOCONCEPT®.