Reinforcement of BETOCONCEPT® earth retaining walls Reinforcement of low bearing embankments Strengthening cavities Reinforcing a composite structure Capping layer Membrane Warp Technology BETONAP standard weave Last and immediate tension The geo-polyester high tenacity BETONAP® is manufactured with a unique technology called woven-knit frame. This technology allows a perfect adaptation to civil works and earth works through grids of very structured high tensile stiffness. Classical weave The thread technology assures a straight position shear point Properties The installation has immediate tension through the mesh without ripple and there is a perfect correlation between the performance of the material and cables of the constituent fabric. The structure provides an excellent groundnesting geotextile to mobilise effort to stabilise the land. It also avoids the problems of interstitial pressure, with a high permeability. System patented, trademark and design registered. Reproduction, even partial prohibited without permission. Information is given in good faith but is subject to change without prior notice.

Roll standard length: 100 m Gross weight: 223 kg Diameter: 390 mm BETONAP Type* *Standards. Please consult us for higher resistance values Slip circle Construction of embankments on compressible or low bearing soil Stability confirmed Soft ground nrTnMAn y BETONAP Increased support capacity The land on which the structure will be assembled must be verified by an Approved Geotechnical Engineer to validate the design. Our responsibility is limited to products provided. The quality of foundation soil, slope faces, backfill and the installation are the responsibility of the Employer or Contractor...