Betojard ®

Betojard ®

Betojard ®

Product catalog summary
Overview: The document provides technical specifications and construction guidelines for BETOJARD® systems, which are used for slope reinforcement, noise bunds, acoustic screens, and boundary walls. The system is patented and trademarked, with reproduction prohibited without permission.
Technical Features:
  • Single element weight (empty): 11 kg; full: 23 kg.
  • Double element weight (empty): 21 kg; full: 48 kg.
  • Weight per m² (full): 500 kg; 7 units per m².
  • Packaging: 4 m² per pallet.
Construction Guidelines:
  • Site verification by an Approved Geotechnical Engineer is required.
  • Responsibility for foundation soil, slope faces, backfill, and installation lies with the Employer or Contractor.
  • Typical slope height: up to 1.70 m with a 28-degree angle in excellent quality ground.
  • Vertical gardening dwarf wall: maximum height of 0.6 m.
  • Acoustic screens: heights up to 4 m, requiring specific structural studies.
Installation Procedure:
  • Set out the structure location and dig a trench 600mm wide and deep.
  • Pour a 150mm depth of concrete and embed a mesh layer before setting.
  • Lay the first row, ensuring level and plumb alignment, and fill cells with concrete.
  • Backfill with compacted layers and install a collector drain.
  • Subsequent rows depend on the chosen angle and module positioning.
Design Considerations:
  • Limited to good quality land without surcharge or slippage.
  • Wall vertical partially armouring with variable inclination by tilting the first element.
  • Construction of right angles is possible.
See more

Catalog excerpts

Betojard ®-1

Technical features Single element Weight of the single element empty: 11 kg Weight of the double element empty 21 kg Weight of full single element: 23 kg Weight of full double element: 48 kg The module is composed of a double and a single element 0,20 m Packaging: 4 m²/pallet Number of units per m²: 7 Weight elements in full m²: 500 kg Boundary walls Double sided planting Slope reinforcement Noise bunds Acoustic screens System patented, trademark and design registered. Reproduction, even partial prohibited without permission. Information is given in good faith but is subject to change without prior notice.

 Open the catalog to page 1
Betojard ®-2

BETOJARD Possible uses Typical slope: up to 1.70 m in height with an angle - 28 degrees in ground of excellent quality without surcharge. Vertical gardening dwarf wall: maximum 0.6 m. Closure: the elements are used to create permanent formwork the doubles are filled with gravel or sand, except the last three elements that are bonded with epoxy adhesive. Acoustic screen: heights up to 4 m - sold only with study specific to each structure. Construction Set out beforehand the location of the assembled structure. Dig a trench 600mm wide and 600mm deep. Flow at full excavation width a 150mm depth...

 Open the catalog to page 2

All BETOCONCEPT catalogs and technical brochures

  1. BETOTITAN XL

    2  Pages

  2. pieramur

    2  Pages

  3. Betophone®

    2  Pages

  4. Betoflor ®

    2  Pages

  5. Betonap ®

    2  Pages

  6. Betoplus ®

    2  Pages

  7. Betotitan ®

    4  Pages

  8. Leromur ®

    4  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.