*myarchiexpo

Catalogs
Beta-Calco
LE LOUVRE™

LE LOUVRE™

Product catalog summary

Summary of Technical Document for LE LOUVRE™ - CONTINUOUS WALL

A. Luminaire Options: Two types are available: LELW1W Direct and LELW2W Direct/Indirect. A power cord is required for every 50 linear feet.

B. Length of Run: Minimum order length is 4ft, with increments of 2ft. Examples include SFA040 for 4ft and SFA500 for 50ft.

C. Maximum Length Per Section: Options range from 4ft to 12ft. For example, a 40ft run with SL12 would be divided into four 10ft segments.

D. Louver Options: Includes Frosted, Black, Satin Chrome, Satin Gold, and Satin Champagne. Note that Satin Gold and Satin Champagne may cause a slight color cast.

E. Lumens per Foot (Direct): Options range from 100 lm/ft to 1200 lm/ft, influenced by louver color.

F. Lumens per Foot (Indirect): Options range from 250 lm/ft to 1600 lm/ft.

G. Color Rendering Index (CRI): Options are CRI 80+ and CRI 90+.

H. Correlated Color Temperature (CCT) Direct: Options include 3000K, 3500K, and 4000K.

I. CCT Indirect: Options include 3000K, 3500K, and 4000K.

J. Direct Diffuser Options: Includes Asymmetric, Diffused light, and Comfort diffusers.

K. Uplight Diffuser Options: Includes Opal and Asymmetric diffusers.

L. Blackout Plate: Available per foot to prevent lighting up duct work.

M. Voltage Options: Includes 120/277V, 240V, 347V, and Low Voltage.

N. Dimming Options: Includes 0-10V, DALI, DSI/switchDim, and PoE.

O. Fixture Finish Options: Includes White, Black Metallic, Silver Metallic, Gold Metallic, and various wood grains and metallic textures.

P. Emergency Options: Includes Integral Emergency system and Emergency generator circuit.

Q. Circuits: Options for Single or Dual circuit.

R. Sensors: Not specified in the document.

Additional Information: Specifications are subject to change without notice. For special requirements, contact [email protected].

Catalog excerpts

Fixture Type: A. LUMINAIRE LELW1W Direct LELW2W Direct/Indirect One power cord for every 50 linear feet. The minimum length of order is 4ft. Lengths are to be in 2ft increments. Example: 4ft = SFA040 Example: 10ft = SFA100 Example: 50ft = SFA500 You can select the preferred maximum length per segment, to account for transportation and building constraints. Example: If a 40ft run is required and SL12 (12ft) is selected, we would provide 4 10ft segments. For special requirements, please contact [email protected]. LV1 Frosted LV2 Black LV4 Satin Chrome LV6 Satin Gold 1 E. LM/FT (DIRECT) LPF010 100 lm/ft LPF050 500 lm/ft LPF100 1000 lm/ft Lumens/ft are determined by the color of the Louver. Consult website for available lumens/ft. based on selected louver. F. LM/FT (INDIRECT) LPG000 Not required LPG100 1000 lm/ft Consult website for available lumens/ft based on selected louvers. betacalco.com | +1 416-531-9942 | [email protected] © 2024 Beta-Calco Inc. Specifications are subject to change without notice There will be a slight color cast on the wall when using the Satin Gold or Satin Champagne louvers.

Open the catalog to page 1

DD1 Asymmetric diffuser DD3 Diffused light diffuser 1 2 DD4 Comfort diffuser 3 1 Recommended for use with Frosted louver only. When standing at the end view of the profile on the side where the power cord is installed, the asymmetric beam will aim to the right. 2 High output diffuser, all data shown based on this diffuser. 3 5% reduction from DD3. The Comfort lens provides better control and softer distribution. UD0 Not required UD2 Opal diffuser UD3 Asymmetric diffuser 1 i Available up to 1200 lm/ft. UB00 Not required UB__Blackout plate i i Available on a per foot basis. May be required to prevent...

Open the catalog to page 2

Open the catalog to page 3

Open the catalog to page 4

Open the catalog to page 5

All Beta-Calco catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list