WE WEIGH VERY LITTLE: WE ARE iLeggeri CONCRETE AND LIGHT SCREED BASED ON RECYCLED FOAM GLASS

WE LEARN EVERY DAY TO GO BEYOND WHAT WE HAVE ACHIEVED, DRIVEN BY A PHILOSOPHY INSPIRED BY RESEARCH AND INNOVATION

iLeggeri! WHIT RECYCLED FOAM GLASS This is what is behind iLeggeri (concrete and light screed) the new product by the Bernardelli Group, the Brescia company always at the forefront to understand where the market is headed. And, especially the renovation market, which today needs reduced weight products that can be used where lightness is required: restoration of old floors, structural reinforcement in existing buildings or even concrete products for street furniture. The iLeggeri range is available in the two products CLSLIGHT, lightweight pre-dosed structural concrete, and CTLIGHT, predosed lightweight...

L Lightweight structural concrete RESISTANCE CLASS ✔ Perfect for LEED buildings ✔ Weighs 20% less compared to ordinary concrete ✔ Structural Lightweight structural pre-dosed ready to use concrete It is a light concrete that weighs 1.800 kg/m3: a weight saving of approximately 20% compared to ordinary concrete, while maintaining the same structural performance. It has, in fact, a class of compressive strength of 25/28. Its fluidity - S4 - makes it easy to use even for complex castings. CLSLIGHT is used in situations which require low weight as a result of design requirements, such as in structural...

TECHNICAL DATA DESCRIPTION AVERAGE VALUES NORMAL LIMITS on an annual basis A/C ratio Maximum size of the aggregate Slump Test Consistency class Volumic mass of fresh concrete Compressive strenght after 28 days Strenght class Exposure class

Medium drying lightweight scree COMPLIES WITH EUROPEAN REGULATION COMPLIES WITH EUROPEAN REGULATION ✔ Drying after 48 hours ✔ Perfect for LEED buildings Lightweight pre-dosed ready to use cementitious screed It is a lightweight screed that weighs only 1100 kg/m3 compared to 1800/2000 kg of traditional screed. CTLIGHT is used for the application of indoor and outdoor, medium drying, adherent, non-adherent (desolidarized) and floating screed. CTLIGHT can be walked on 10 hours after application and can be covered with ceramic, terracotta and natural stone tiles 48 hours later. For moisture-sensitive...

TECHNICAL DATA DESCRIPTION AVERAGE VALUES NORMAL LIMITS on an annual basis Maximum size of the aggregate Density of the hardened mortar Kg/m3 Flexural strength after 28 days Compressive strength fter 28 days

BERNARDELLI GROUP Via del Canneto, 53 | 25010 Borgosatollo (BS) ITALY Tel. +39 030 2702372 | Fax +39 030 2703192 www.bernardelligroup.com | [email protected]