1. Catalogs
  2. Bernardelli Group
  3. CLSRD PREDOSED, READY-TO-USE STRUCTURAL
video corpo

CLSRD PREDOSED, READY-TO-USE STRUCTURAL

CLSRD PREDOSED, READY-TO-USE STRUCTURAL

CLSRD PREDOSED, READY-TO-USE STRUCTURAL

Product catalog summary
Product and Fields of Application
CLSRD is a pre-dosed concrete product packaged in polyethylene bags, containing silico-calcareous aggregates and Portland cement. It is designed to create C 35/45 resistance class concrete by adding water as specified in the technical sheet. The product complies with EN 206:2014 and UNI 11140 standards and is suitable for structural castings such as plinths, foundations, beams, columns, and more.

Preparation of the Product
To prepare CLSRD, mix a bag with approximately 1.6 liters of clean water using a mechanical mixer until a fluid consistency (S4) and an a/c ratio of 0.45 is achieved. Mixing should not exceed 3 minutes. It can also be mixed manually or with common concrete machines.

Packaging and Consumption
CLSRD is available in 25 kg polyethylene bags. Approximately 90 bags are needed to produce 1 m³ of concrete.

Warnings
- Operating temperature should be between +5°C and +35°C.
- Avoid excess water to prevent reduced compressive strength and increased drying shrinkage.
- Do not add other materials to the mix.
- Protect the concrete from rapid evaporation to prevent cracks and porosity.
- Store unopened bags in a dry, ventilated place for up to 6 months.
- Do not expose bags to sunlight for more than 30 days.

Technical Data
- A/C ratio: 0.45
- Maximum aggregate size: 12.0 mm
- Slump Test: 180 mm
- Consistency class: S4
- Working time: 20-30 minutes at 20 ± 2°C
- Volumic mass of fresh concrete: 2,450 Kg/m³
- Bulk density of hardened concrete: 2,350 Kg/m³
- Compressive strength: 4 N/mm² after 2 hours, 51 N/mm² after 28 days
- Strength class: C 35/45
- Exposure class: XC4, XS3, XD3, XF4 (EN 206:2014); XC4, XS1, XD2, XF4 (UNI 11104)

The technical data are based on annual average values from factory samples and are indicative. Users should verify product suitability through preliminary tests. For the latest technical datasheet, visit www.bernardelligroup.com.
See more

Catalog excerpts

CLSRD PREDOSED, READY-TO-USE STRUCTURAL-1

PREDOSED, READY-TO-USE STRUCTURAL ORDINARY CONCRETE FOR QUICK FORMWORK REMOVAL (RD) NEW|! RESISTANCE CLASS CHARACTERISTIC RESISTANCE PRODUCT AND FIELDS OF APPLICATION CLSRD is a pre-dosed product in polyethylene bags containing in separate sections a mixture of silico-calcareous aggregates in 3 granulometric classes, and portland cement. Simply by adding the quantity of water indicated in the technical sheet it can be made, right in the construction site, a C 35/45 resistance class concrete a concrete that complies with standards EN 206:2014 and UNI 11140 (instructions for the application of the EN 206:2014 in Italy). CLSRD is employed for the realization of structural castings as plinths, foundations, beams, columns, composite slabs. Ideal for manhole and well grouting, exposed structures, walls, floors, stairs. Also suitable for exposed structures, walls, floors, stairs. PREPARATION OF THE PRODUCT A bag of CLSRD should be mixed by adding approximately 1.6 liters of clean water by means of a mechanical mixer (cement mixer, auger mixer) until you reach a S4 fluid consistency and a/c ratio of 0.45. Do not exceed 3 minutes of mixing time. CLSRD can also be mixed by hand with the aid of normal construction equipment (shovel) provided that the mixture is smooth and free of lumps. CLSRD can be mixed and carried with the most common concrete machines (pneumatic pumps). For the realization of structural castings as plinths, foundations, beams, columns, slabs acting, etc. EDILQUATTRO BERNARDELLI GROUP Via del Canneto, 53 | 25010 Borgosatollo (BS) - ITALY | Tel +39 030 2702372 | Fax +39 030 2703192 [email protected] | www.bernardelligroup.com

 Open the catalog to page 1
CLSRD PREDOSED, READY-TO-USE STRUCTURAL-2

PREDOSED, READY -TO-USE STRUCTURAL ORDINARY CONCRETE FOR QUICK FORMWORK REMOVAL (RD) TECHNICAL DATA DESCRIPTION TESTING METHOD AVERAGE VALUES NORMAL LIMITS (on an annual basis) A/C ratio Maximum size of the aggregate Slump Test Consistency class Volumic mass of fresh concrete Bulk density of hardened concrete Compressive strenght after: Strenght class Exposure class COLOUR CHART PACKAGING Polyethylene bags of 25 kg (Product subject to natural shrinkage) CONSUMPTION 90 bags per pack 1 m3 of concrete CLSRD is ready for use, it is to be mixed only with clean water, we STRONGLY RECOMMEND NOT to add...

 Open the catalog to page 2
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.