video corpo

CLS40

CLS40

CLS40

Product catalog summary
Product and Fields of Application: CLS40 is a pre-dosed concrete product packaged in polyethylene bags, containing silico-calcareous aggregates, Portland cement, and superplasticizer additives. It is designed to achieve C 30/37 and C 32/40 resistance classes according to EN 206:2014 and Italian standards, respectively. CLS40 is suitable for structural castings such as footings, foundations, beams, columns, and exposed façade structures.
Preparation of the Product: Mix one bag of CLS40 with 1.2 liters of clean water using a mechanical mixer to achieve an S4 fluid consistency with an a/c ratio of 0.45. Mixing should not exceed 3 minutes. Manual mixing is possible if the mixture is homogeneous and lump-free. The product can be transported using standard concrete machinery.
Characteristics: CLS40 offers a characteristic resistance of Rck 40 and is packaged in 25 kg polyethylene bags. Consumption is 84 bags per cubic meter of concrete. The product should be stored in a dry, ventilated place and not exposed to sunlight for more than 30 days.
Warnings: Operating temperature should be between +5°C and +35°C. Excess water reduces compressive strength and increases drying shrinkage. Do not add other materials to the mix. Precautions should be taken to prevent water evaporation during the initial hours after casting to avoid cracks and ensure durability. Formwork removal should be delayed unless alternative curing methods are used.
Technical Data: The product has an a/c ratio of 0.45, a minimum aggregate size of 12.0 mm, and a slump test result of 180 mm. The volumic mass of fresh concrete is 2,380 kg/m3, and compressive strength after 28 days is greater than 45.0 N/mm2. Exposure classes include XC4, XS3, XD3, and XF4 according to EN 206.
Additional Information: The technical data provided are average values based on annual analyses. Users should verify product suitability through preliminary tests. The datasheet is subject to updates, and the latest version should be downloaded from the manufacturer's website.
See more

Catalog excerpts

CLS40-1

ORDINARY STRUCTURAL PRE-DOSED READY TO USE CONCRETE CHARACTERISTIC RESISTANCE RESISTANCE CLASS RESISTANCE CLASS PRODUCT AND FIELDS OF APPLICATION CLS40 is a pre-dosed product in polyethylene bags containing in separate sections a mixture of silico-calcareous aggregates in 3 granulometric classes, Portland cement and superplasticizer additives, with which by adding the quantity of water indicated in the technical data sheet it is possible to pack C 30/37 class of resistance on the site in conformity with the EN 206:2014 and class of resistanc C 32/40 in conformity with the (instructions for the application of the EN 206-1 in Italy). CLS40 is used for the construction of structural castings such as footings, foundations, beams, columns, composite slab, etc., indicated also for structures with exposed façade walls, floors, stairs, etc. CLS40 is used for the construction of structural castings such as footings, foundations, beams, columns, composite slab, etc. PREPARATION OF THE PRODUCT A bag of CLS40 is to be mixed with the addition of 1.2 litres of clean water by means of a mechanical mixer (cement mixer, cochlea kneader) until obtaining an S4 fluid consistency and a/c ratio of 0.45. Do not exceed 3 minutes of mixing time. CLS40 can also be mixed by hand with the aid of normal site equipment (shovel) as long as the mixture is homogeneous and free of lumps. CLS40 is mixed and transported with the main machines (pneumatic pumps) for concretes on the market. Indicated also for structures with exposed façade walls, floors, stairs, etc. EDILQUATTRO BERNARDELLI GROUP Via del Canneto, 53 | 25010 Borgosatollo (BS) - ITALY | Tel +39 030 2702372 | Fax +39 030 2703192 [email protected] | www.bernardelligroup.com

 Open the catalog to page 1
CLS40-2

ORDINARY STRUCTURAL PRE-DOSED READY TO USE CONCRETE TECHNICAL DATA DESCRIPTION TESTING METHOD AVERAGE VALUES NORMAL LIMITS (on an annual basis) A/C ratio Minimum size of the aggregate Slump Test Consistency class Volumic mass of fresh concrete Compressive strength after 28 days Resistance class PACKAGING Polyethylene bags of 25 kg (Product subject to natural shrinkage) CONSUMPTION 84 bags per pack 1 m3 of concrete CLS40 is ready for use, it is to be mixed only with clean water, we STRONGLY RECOMMEND NOT to add aggregates, cement, lime or other products, otherwise there shall be an impairment...

 Open the catalog to page 2
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.