TECH_EN_DECO_CIRE_GOLD_START
4Pages

DECO CIRE GOLD STAR FINE Decorative Forced Screed for horizontal and vertical surfaces Description A ready- to- use pasty monolithic mortar designed for application on vertical and horizontal surfaces. It provides an aesthetically excellent and extremely smooth finish, by offering different decorative styles. Available in light gray and it can be tinted in a series of indelible shades through the Berling's color system. Suitable for structural (floors, walls, stairs, built units, bathrooms) as well as non-structural surfaces (wooden furniture, tables, etc.) It can be used also in pool paint systems. It can be used both indoors and outdoors once the appropriate recommended system is applied. Purpose of use It protects all surfaces from everyday use, weather and mechanical stresses whilst providing an excellent aesthetic effect of high standards. Product characteristics • Ready- to use pasty material. • High resistance to impact. • High resistance to mechanical stress. • High flexibility. • Mildew resistant. • Stable quality and color throughout the application process. • No loss of material as it does not dry or hardens. • Can be tinted in many shades. Available in light grey and white. It can be tinted in 165 shades with Berling's Color Studio. Film thickness and Coverage Theoretical performance 1,5-1,7kg/mm/m2 of film depending on the application method. For 3 coatings (finished surface) the coverage up to reaches 8,5 m2 for the packaging of 15 kilos. The use of a mesh increases the total consumption.

Recommended paint systems Old and new surfaces. / Proposed application surfaces Walls and floors made from reinforced concrete or cement mortar- plasterboard or fiberboard- Ytong- synthetic or raw whitewood etc.

The application should be carried out in ambient temperature from 100C to 350C and maximum relative humidity of 80%. Application Instructions Thoroughly clean the surface where the material is to be applied from dust, salts, grease, old peeled paints or concrete pieces etc. Stir well before use. Before applying, use the specific additional component B' in a maximum ratio of 0,500 kg/15 kg Deco Cire Gold Star Fine and stir well (The use B component is optional. The more we add the thicker becomes the final product). Vertical surfaces: Apply the specific primer according to the surface type...

Phase II, Subcategory l, decorative effect coatings, V.O.C content limit value = 200gr/lt, Maximum V.O.C. Content = 30gr/lt (ready to use). Instructions precautions - Prevent environmental impact – ADR Empty containers and unused product must be disposed in compliance with applicable legislation and local regulations. Keep the workplace well ventilated during the application process. Wear protective gloves and goggles. According to the ADR agreement, road transport of the product is not classified as dangerous. For further information you may request the Safety Data Sheet of the product....