POPLAR EXTERIOR PLYWOOD
POPLAR EXTERIOR PLYWOOD
- Panel Thickness: Available in 4, 8, 10, 12, 15, 18, and 25 mm.
- Surface Weight: Ranges from 1.8 to 11 kg/m² depending on thickness.
- Bonding Quality: EN 314-2 Class 3.
- Bending Strength: Varies by grain direction and thickness, with long grain ranging from 16 to 40 MPa and cross grain from 17 to 30 MPa.
- E-Modulus: Long grain ranges from 3400 to 4500 MPa, cross grain from 1900 to 3800 MPa.
- Thermal Conductivity: 0.12 W/(m·K) as per EN 13986.
- Standard Sizes: 2520x1850 mm.
Poplar plywood is noted for its good dimensional stability and lightweight, combined with strong mechanical performance. It is primarily used in the furniture and furnishing industry and can be supplied with veneering surface finishing for non-structural uses.
Bellotti S.p.a., Via S. Francesco, 1, 22072 Cermenate (CO) Italy. Contact: T +39 031777222, F +39 031771148, www.bellottispa.com, [email protected].
The data provided are indicative and subject to change without notice. It is the purchaser's responsibility to ensure the suitability of Bellotti products for their intended application and to comply with handling, transportation, and usage requirements as per the manufacturer's guidelines and applicable legislation.
Catalog excerpts
POPLAR EXTERIOR PLYWOOD Good dimensional stability and lightweight combined with good mechanical performance are the characteristics of poplar plywood. It is mainly used in Furniture and Furnishing Industry and can be supplied with veneering surface finishing for non-structural uses Panel thickness Surfare weight Bonding Quality Bending strenght long grain Bending strenght cross grain E-Modulus Long grain E-Modulus Cross grain Thermal Conductivity Standard sizes Via S. Francesco, 1 22072 Cermenate (CO) Italy T +39 031777222 F +39 031771148 www.bellottispa.com [email protected] Nota: I dati qui sopra riportati sono da considerarsi indicativi e suscettibili di variazioni sensa preavviso, E' responsabilità dell'acquirente determinare che i prodotti Bellotti siano idonei alle applicazioni desiderate ed è altresì responsabile del fatto che le modalità di movimentazione, trasporto, deposito ed impiego siano conformi alle indicazioni del fabbricante e alle prescrizioni della normativa vigente. Note: Above data are to be considered for information only and subject to modifications without notice. It is up to purchaserestabilish that Bellotti Products are suitable to selected application or installation and ensure that ways of handling, transp ortation ed usage are compliiant to Manufacturer's requirements and applicable legislation
Open the catalog to page 1All BELLOTTI catalogs and technical brochures
Lariphon CMOK Resined2 Pages
Lariphon F2 Pages
Lariphon ECO Light2 Pages
Lariphon CMSD2 Pages
LARIPAN® En 200 SV K1 Page
LARIPAN® En 200 SV IG1 Page
Pannello Venezia1 Page
LARIDOOR®1 Page
BEECH EXTERIOR PLYWOOD1 Page
Resined Beech Plywood2 Pages
CARPLY RA2 Pages
Barre ISO-T1 Page
LARIMAR© 601 Page
LARIPHON®1 Page
LARICROSS©1 Page
IROKO MARINE PLYWOOD1 Page
MAHOGANY MARINE PLYWOOD1 Page
Okoumé Marine Plywood1 Page
GENERAL CATALOGUE16 Pages
YACHT BUILDING17 Pages
Okoumè Exterior Plywood1 Page
TRANSPORT7 Pages
CONSTRUCTION PANELS9 Pages
- Commercial panel
- Metal facing sandwich panel
- High-resistance panel
- High-resistance sandwich panel
- Wood look panel
- Plywood panel
- Wood panel
- Wood plywood panel
- Construction panel
- Commercial plywood panel
- Construction plywood panel
- Wood look plywood panel
- Building plywood panel
- Interior sandwich panel
- Lightweight sandwich panel
- Joinery sandwich panel
- Door acoustic sandwich panel
- Wood facing sandwich panel
- FSC certified plywood panel
- Joinery panel