IROKO MARINE PLYWOOD

Product catalog summary

Specifications:
The document provides specifications for Iroko Marine Plywood, highlighting its panel thickness, number of layers, surface weight, gluing class, bending strength, and E-Modulus for both long and cross grain directions. The panel thickness ranges from 8 mm to 20 mm, with corresponding layers from 3 to 9. Surface weight varies from 4.5 kg/m² to 10.8 kg/m². Bending strength and E-Modulus values are provided for different grain orientations, indicating the material's mechanical properties.

Procedures and Standards:
The plywood is glued according to EN 314-2 Class standards, suitable for exterior applications (Class 3). It is constructed with Iroko sliced cut veneer and Okoumé rotary cut veneer core, ensuring high durability and mechanical resistance, especially in humid and saline environments.

Applications:
Specifically designed for boatbuilding, the plywood is ideal for use in extreme conditions, such as high humidity and saline environments. It is widely used in deck construction in boatyards.

Recommendations:
The document advises purchasers to ensure the suitability of Bellotti products for their specific applications and to comply with handling, transportation, and usage guidelines as per the manufacturer's requirements and applicable legislation.

Contact Information:
Bellotti S.p.A., Via S. Francesco, 1, 22072 Cermenate (CO) Italy. Phone: +39 031777222, Fax: +39 031771148, Website: www.bellottispa.com, Email: [email protected].

Note:
The data provided are indicative and subject to change without notice. It is the purchaser's responsibility to verify the product's suitability for their intended application.

Catalog excerpts

IROKO MARINE PLYWOOD Iroko tr. 26/10 Marine Plywood is characterized by an excellent durability and a high mechanical resistance, despite its low weight. This plywood panel, RINA type certified, glued by phenolic or melamine resin, is constructed with Iroko sliced cut veneer and Okoumé rotary cut veneer core. This product is specific for boatbuilding, considering also the extreme conditions of its applications (excellent durability in environments with a high level of humidity, also saline). The phenolic or melamine gluing and the Okoumé veneer, are suitable for exterior applications (Class 3 in according to EN 314); in boatyards the Iroko tr. 26/10 Marine Plywood is widely used in deck. Panel thickness Surfare weight Bending strenght long grain Bending strenght cross grain E-Modulus Long grain E-Modulus Cross grain Trasmittanza Termica Standard sizes Via S. Francesco, 1 22072 Cermenate (CO) Italy T +39 031777222 F +39 031771148 www.bellottispa.com [email protected] Nota: I dati qui sopra riportati sono da considerarsi indicativi e suscettibili di variazioni sensa preavviso, E' responsabilità dell'acquirente determinare che i prodotti Bellotti siano idonei alle applicazioni desiderate ed è altresì responsabile del fatto che le modalità di movimentazione, trasporto, deposito ed impiego siano conformi alle indicazioni del fabbricante e alle prescrizioni della normativa vigente. Note: Above data are to be considered for information only and subject to modifications without notice. It is up to purchaserestabilish that Bellotti Products are suitable to selected application or installation and ensure that ways of handling, transp ortation ed usage are compliiant to Manufacturer's requirements and applicable legislation

Open the catalog to page 1

IROKO MARINE PLYWOOD

IROKO MARINE PLYWOOD

Catalog excerpts

All BELLOTTI catalogs and technical brochures